Bosch Benchmark 500 Series Panduan Instalasi - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Oven Bosch Benchmark 500 Series. Bosch Benchmark 500 Series 39 halaman. Built-in combination ovens
Juga untuk Bosch Benchmark 500 Series: Panduan Instalasi (22 halaman)
Halaman Cetak
9001080875 Rev A
Placing the Combination Oven Into the
Cabinet Opening
9 CAUTION
To avoid damage to the door do not lift, pull or push
the unit during installation by using any oven door
handle as a gripping point.
When lifting the combined unit into place, avoid grasping
the upper element to avoid damaging it. See the illustration
following for the correct lifting point. This illustration shows
a detailed view of the oven cavity. Note the location of the
ridge inside the top of the cavity. This is the area to grip
from the front when lifting the combined unit.
Installing the Oven into the Cabinet
1. Lift the combination oven unit into the cabinet cutout
without allowing the unit base to contact the flooring.
2. Guide the unit straight back into the cabinet cutout.
Note: Be careful not to crimp the flexible conduit
between the oven and the cabinet back wall. If
necessary, guide the flexible conduit into the wall or
cabinet access hole so it doesn't prevent the unit from
being pushed all the way into the cabinet opening. The
oven should be straight and level, not crooked.
3. Push the unit straight in until the oven trim is flush with
the front of the cabinet trim.
4. Install supplied screws through tap holes in trim (4
screws).
English 13