Draytek Vigor 2600 VGST Panduan Pemasangan Sendiri - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemasangan Sendiri untuk Router Jaringan Draytek Vigor 2600 VGST. Draytek Vigor 2600 VGST 10 halaman. Dsl router
Halaman Cetak
Setting up the provider:
All you need to do now is enter, from any PC
To test your Internet connection, first
connected to the DSL router, a www address
use the test username and password on
in the respective field in your browser,
page 20 in section Internet – Internet
the DSL router will automatically dial the
Connection Functionality Check. After
connection and you can start surfing.
checking the DSL connection functionality,
you can connect to the Internet using your
This Guide is a brief set of instructions
username and password.
enabling you to launch the equipment to gain
fast Internet connection; explanation of other
After setting all parameters it is necessary
functionalities of the DSL router Vigor 2600
to confirm and save the setup in the DSL
VGST is available in the digital guide on the
router by clicking on "Confirm". Now,
enclosed installation CD.
your DSL router is configured for Internet
connection. You can check whether you are
really connected to the Internet in "Správa
systému" by clicking on "Online stav".
18
> Self-Installation Guide
Testing the Correct Connection
Telephone – telephone/digital line functionality check
The dialling tone should be heard from the receiver of your telephone/fax. Try to make a call
and check the quality of sound in the receiver. If you installed the device correctly, the quality of
sound did not change compared to the condition prior to the installation.
Possible problems:
the dialling tone is not heard
■
disturbing sounds (noise, crackling) heard from the receiver
■
calls cannot be made from the telephone
■
Telephone line outages may occur during the DSL installation; a digital line may be functional
1 minute after the NT was connected to the splitter. If these faults have not disappeared after
a repeated check of the connection carried out according to the Guide, contact our Fault
Reporting Centre 12129.
Router – DSL Connection Functionality Check
Check status of the indication diodes on your router and compare it to the description included
in the documentation from your DSL router manufacturer. The router should be in hibernating
mode.
Possible problems:
no control on the router glowing
■
status of controls not corresponding to hibernating status of the router
■
not connected to the LAN network
■
In case you discover any discrepancies, check the entire installation procedure again. If you do
not succeed in resolving the problem, contact our Technical Support Centre at 0900 211 111,
or the Technical Support Centre of the DSL router supplier at 02/44 64 18 32.
> DSL router DrayTek Vigor 2600 VGST
Internet – Internet Connection Functionality Check
To check whether your router has been installed correctly and whether your DSL line is
functional, check the "LINE" LED diode on your DSL router. If the LED is flashing, the router is
synchronising itself with the DSL line. To test the Internet connection, wait until the LED turns
solid green.
For testing of the Internet connection, please use the following account:
Login: dsl@test
Password: dsl
To test the DSL functionality of your connection, write the web address www.t-com.sk in your
Internet browser (Internet Explorer, Netscape, Firefox etc.) serving for the purposes of testing
the functionality of the installation. The functionality can be tested only on this web site; access
to other web sites will be disabled. If the relevant page is displayed, the DSL connection is
functional. Now you can log in with the login and password you were provided by your
Internet service provider. High-speed Internet is ready and you can start working on and
enjoying the Internet. In case of any problems with the connection, please contact the
Internet Hotline 0800 123 777.
19
> DSL router DrayTek Vigor 2600 VGST
20