Bosch CBG675B 1B Series Buku Petunjuk - Halaman 15
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Oven Bosch CBG675B 1B Series. Bosch CBG675B 1B Series 48 halaman.
Halaman Cetak
OTime-setting options
Your appliance has different time-setting options.
i o n s
T i m e - s e t t i n g o p t
Time-setting option Use
Cooking time
After the set cooking time has elapsed, the
q
appliance ends the operation automatically.
End
Enter a cooking time and the required end
r
time. The appliance starts automatically so
that the operation ends at the required time.
Timer
The timer functions like an egg timer. It runs
t
independently from the operation and the
other time-setting options. After the set time
has elapsed, the appliance does not switch on
or off automatically.
You can call up the cooking time and the end time after
setting a operation using the s field. The timer has a
separate t field and can be adjusted at any time.
A signal sounds after a cooking time or timed period
has elapsed. You can cancel the signal early by
touching the s field.
You can change how long the signal sounds for
Note:
in the basic settings. ~ "Basic settings" on page 17
Setting the cooking time
You can set the cooking time for your dish on the
appliance. This means that the cooking time is not
unintentionally exceeded and you do not need to
interrupt other work in order to end the operation.
Applying settings
Depending on which direction you turn the rotary
selector first, the cooking time starts at a particular
default value: Left = 10 minutes, right = 30 minutes.
The cooking time can be set in one-minute increments
up to one hour, and then in five-minute increments.
The maximum setting is 23 hours and 59 minutes.
Example in the picture: Cooking time of 45 minutes.
Set the operating mode, and temperature or level.
1.
Touch the s field before starting.
2.
The cooking time is highlighted white in the display.
Turn the rotary selector to set the cooking time.
3.
The value is applied after a few seconds, or touch
the s field twice. The cooking time is shown on the
display under the operating mode and temperature
or level.
Press the l Start/Stop button to start.
4.
The cooking time counts down on the display.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating. The cooking time
00 m 00 s is shown on the display.
You can set another cooking time using the s field, or
continue the operation without a cooking time using
the l Start/Stop button.
When your dish is ready, switch the appliance off using
the ÿ On/Off button.
Changing and cancelling
To change the cooking time, touch the s field. The
cooking time is highlighted white and can be changed
using the rotary selector. Use the s field to accept the
change.
If you want to cancel the cooking time, reset the
cooking time to zero. After the change has been
applied, you can continue the operation without a
cooking time using the l Start/Stop button.
Setting the end time
You can delay the time that the cooking time ends. You
can, for example, put your dish in the cooking
compartment in the morning and set the cooking time
so that it is ready at lunch time.
Notes
Ensure that food is not left in the cooking
■
compartment for too long as it may spoil.
Do not adjust the end time once the operation has
■
started. The cooking result would no longer be
satisfactory.
Applying settings
The end of the cooking time can be delayed by a
maximum of 23 hours and 59 minutes.
Example in the picture: The set cooking time is
45 minutes and the dish should be ready at 12:00.
Set the operating mode, and temperature or level.
1.
Set the cooking time.
2.
Before starting, touch the s field again once.
3.
The end time is highlighted white in the display.
Time-setting options en
15