Alemlube 630A Panduan Teknis Pemilik - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Teknis Pemilik untuk Peralatan Alemlube 630A. Alemlube 630A 8 halaman. 20v lithium-ion cordless grease gun 450g
OWNER'S TECHNICAL MANUAL
20V Lithium-ion Cordless Grease Gun 450g
SERVICE
1. Have your power tool serviced by a qualified technical service using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized
service providers.
ADDITIONAL SAFETY WARNINGS
1. Portable grease power tools can generate pressures up to 10,000psi/700bar limited to 7,250psi/500bar with operator safety
front of mind. During the operation always use gloves and eye protection. Keep your hands away from the grease nipple.
2. Some components of the tool or the hose may break due to high pressure and may cause a risk of serious injury.
Before use, always inspect the tool and the flexible hose to identify possible damage or wear.
Never use the tool if any of its parts is damaged or worn.
3. High pressure can cause damage to the hose or nozzle grease supply. Use only appropriate grease hoses for use with this
tool and follow its instructions for use and safety warnings.
4. The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways
in which the tool is used. Factor that can affect this value are: how the tool is used, the tool being in good condition
and well maintained, use of the correct accessories in good condition, tightness of the grip on the handles, the tool being
used as intended by its design and these instructions, and if any anti vibration accessories are used.
5. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. To be accurate, an estimation
of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such
as the times when the tool is witched off and when it is running idle but not actually doing the job.
SAFETY INSTRUCTIONS FOR BATTERIES & CHARGER
1. Suitable for general split battery pack.
2. Do not charge or use batteries in explosive atmospheres, such as presence of flammable liquids, gases or powders.
Inserting or removing the battery unit from the charger may cause gases or dust ignite.
3. Use only the charger supplied with the tool. This charger has been specially designed for Lithium-Ion batteries only.
4. Do not charge a damaged battery, replace it immediately.
5. Do not store batteries in places where the temperature can exceed 40ºC.
6. Charge the battery only at room temperature between 10ºC and 40ºC (50ºF and 104ºF).
7. Do not charge batteries in wet or damp environments.
8. Perform selective collection when disposing of battery packs.
This product should not be disposed with other household waste.
9. Do not expose a battery or a battery-powered tool to fire or excessive temperature.
Exposure to fire or temperatures above 130°C (265ºF) may cause an explosion.
10. Do not use the provided batteries with other tools.
11. The battery charger is intended for indoor use only.
12. Use the provided charger to charge only the batteries supplied.
13. Do not expose the charger to rain, snow or ice.
14. Do not abuse the power cable of the battery charger. Keep cable away from heat, oil, sharp edges or moving parts.
The cables damaged or tangled increase the risk of electric shock.
15. The charger plug must match the socket power. Never modify the plug in any way. Plugs not modified and matching sockets
will reduce the risk of electric shock.
16. Do not use the charger if the cable or plug is damaged. Never try to repair the cable or plug.
17. Never try to disassemble the battery charger.
18. Do not cover the charger or battery while charging.
19. Do not use the charger with other batteries.
20. When battery pack is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws
or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
NSW/ACT
QLD/PNG
TEL: (02) 9677 1555
TEL: (07) 3204 9166
FAX: (02) 9675 1155
FAX: (07) 3204 1224
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
Visit our website at
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9302 4199
TEL: (08) 8241 7111
FAX: (08) 9303 2095
FAX: (08) 8241 7011
or
www.alemlube.co.nz
630A
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
3