Bosch CMG936A 1S Series Panduan Pengguna dan Petunjuk Instalasi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Petunjuk Instalasi untuk Oven Bosch CMG936A 1S Series. Bosch CMG936A 1S Series 48 halaman.

Halaman Cetak
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
▶
Keep children at a safe distance.
▶
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to run for 30 seconds to 1 minute
2.
at maximum power.
Start the operation.
3.
Check the cookware several times:
4.
If the cookware remains cold or warm to the
‒
touch, it is suitable for microwave use.
If the cookware becomes hot or sparks are cre-
‒
ated, stop the cookware test. The cookware is
not microwave-safe.
11.2 Setting options with the microwave
The microwave can be used on its own, or in combina-
tion with a different operating mode.
Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
To prevent condensation, when the microwave output
is 600 watts and "Boost", the appliance automatically
switches on a heating element. The cooking compart-
ment and the accessories become hot. The cooking
result is not affected by this.
You can switch off this automatic drying function in the
basic settings.
→ "Basic settings", Page 21
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
Never touch the inside surfaces of the cooking com-
▶
partment or the heating elements while they are hot.
Keep children at a safe distance.
▶
Added microwave
Adding the microwave to an operating mode reduces
the cooking time.
You can combine the microwave with the following
functions:
¡ Types of heating → Page 13
– 4D hot air
– Top/bottom heating
– Circulated air grilling 
– Full-surface grill
– Centre-area grill
¡ → "Dishes", Page 19
¡ → "Ventilation function 'Crisp Finish'", Page 18
Possible microwave outputs combined with an
operating mode include:
¡ 90 watts
¡ 180 watts
¡ 360 watts
11.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Page 16
Press "Microwave" in the menu.
1.
Or select the microwave directly using the
‒
ton.
2.
Press the
microwave output ("Boost").
Use the setting ring to set the microwave output.
3.
To confirm the set microwave output, press
4.
the display.
Press
⁠ " Cooking time".
5.
A cooking time must always be set to operate the
microwave.
To change the preset cooking time, press the relev-
6.
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
Use the setting ring to set the cooking time.
7.
If required, use
to reset the setting value.
To confirm the set cooking time, press
8.
play.
Press
to start the operation.
9.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "Boost".
→ "Microwave output settings", Page 11
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
10.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
If you have switched off the drying function for the
11.
microwave in the basic settings and condensation
has formed in the cooking compartment, dry the
cooking compartment.
→ "Drying", Page 26
Note: If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→ "Basic settings", Page 21
Changing the microwave output
You can change the microwave output at any time.
Press
on the display.
1.
Press the microwave output
2.
Use the setting ring to set the microwave output.
3.
To confirm the change, press
4.
a The change is applied.
Changing the cooking time
You can change the cooking time at any time.
Press
on the display.
1.
Press the cooking time
2.
Use the setting ring to change the cooking time.
3.
Microwave en
but-
on
on the dis-
to switch the ap-
⁠ .
on the display.
⁠ .
17