AirStage 9374136018 Panduan Pengoperasian

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kontrol Jarak Jauh AirStage 9374136018. AirStage 9374136018 2 halaman. Wireless type

Halaman Cetak

SWITCHING REMOTE CONTROLLER CUSTOM CODES

1. Press the

2, 4

2. Press the

custom code. (Initially set to )

3. Press the

Change the custom code between

display to the air conditioner custom code.

4. Press the

code will be changed.)

NOTES

(1) If no buttons are pressed within 30 seconds after the custom code is displayed, the system returns to the original clock

display. In this case, start again from step 1.

(2) The remote controller resets to custom code A when the batteries in the remote controller are replaced. If you use a custom

code other than custom code A, reset the custom code after replacing the batteries.

If you do not know the air conditioner custom code setting, try each of the custom codes (

which operates the air conditioner.

OPERATING TIPS

Cooling / heating priority (AIRSTAGE™ (VRF system) Heat Pump model only)

• If another indoor unit in the same system is already operating in the cooling mode or dry mode, heating mode settings cannot be

performed.

• If another indoor unit in the same system is already operating in the heating mode, cooling mode or dry mode settings cannot be

performed.

TROUBLE SHOOTING

Before requesting service, perform the following checks:

Symptom

• Has there been a power failure?

CHECK

Doesn't operate at all.

• Has a fuse blown out, or a circuit breaker been tripped?

ONCE

• Is the main power switch set to the OFF position?

• Is the timer operating?

• Are the remote controller's batteries dead?

The unit operates differently

• Are the remote controller's batteries loaded properly?

from the remote controller's

• Has the remote controller's custom code been reset?

setting.

If the problem persists after performing these checks, or if you notice burning smells, or the TIMER indicator flashes,

immediately stop operation, turn off the electrical breaker and consult authorized service personnel.

SPECIFICATIONS

MODEL

POWER

HEIGHT [mm]

UTB-

DC3V

158

button and display only the clock.

button for more than 5 seconds to display the current

button.

to match the code on the

button again to return to the clock display. (The custom

) until you find the code

Cause and Action

DIMENSION &WEIGHT

DEPTH [mm]

WIDTH [mm]

WEIGHT [g]

AIR CONDITIONER

KEEP THIS OPERATING MANUAL FOR

FUTURE REFERENCE

OPERATING MANUAL

Before using the appliance, read these "PRECAUTIONS" thoroughly and operate in the correct way.

The instructions in this section all related to safely; be sure to maintain safe operating conditions.

This mark indicates procedures which, if improperly performed, are most likely to result in the

DANGER!

death of or serious injury to the user or service personnel.

• This controller contains no user-serviceable parts. Always con-

sult authorized service personnel for repairs.

• If a problem (burning smell, etc.) occurs, turn off the electrical

breaker immediately to stop operation, and then consult au-

thorized service personnel.

This mark indicates procedures which, if improperly performed, might lead to the death or

WARNING!

serious injury of the user.

This mark indicates procedures which, if improperly performed, might possibly result in personal

CAUTION!

harm to the user, or damage to property.

• Do not expose the controller directly to water.

• Do not operate the controller with wet hands.

• Do not touch the switches with sharp objects.

• Always turn off the electrical breaker whenever cleaning the

controller, the air conditioner or the air filter.

• Check the condition of the installation stand for damage.

• Ensure that any electronic equipment is at least one meter

away from the controller.

LOAD BATTERIES (R03/LR03 x 2)

REMOTE CONTROLLER

P/N 9374136018

SAFETY PRECAUTIONS

• Never place fingers or foreign objects inside the outlet port.

Doing so could cause personal injury.

• Avoid installing the controller near a fireplace or other heating

apparatus.

• When installing the controller, take precautions to prevent

access by infants.

• Do not use inflammable gases near the controller.

• Take care to prevent infants from accidentally swallowing

batteries.

PREPARATION

1. Press and slide the

(1) When not using the remote controller for an extended

period, remove the batteries to avoid possible leak-

lid.

age and damage to the unit.

2. Insert batteries.

(2) Never mix new and used batteries, or batteries of

Be sure to follow the

different types.

polarity markings indicated

(3) Batteries should last about one year under normal

in the compartment.

use. If the remote controller's operating range

3. Slide back the lid.

becomes appreciably reduced, replace the batteries

and press the ACL button.

(WIRELESS TYPE)

English

CAUTION