Bosch HB Series Panduan Pengguna dan Petunjuk Instalasi - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Petunjuk Instalasi untuk Oven Bosch HB Series. Bosch HB Series 32 halaman.
Juga untuk Bosch HB Series: Panduan Petunjuk Instalasi (16 halaman), Panduan Pengguna dan Petunjuk Instalasi (36 halaman)
en Programme
Requirements
¡ The type of heating and temperature or setting are
set.
¡ A cooking time is set.
Press the
button repeatedly until
1.
in the display.
Press the
or
button.
2.
a The display shows the calculated end time.
Use the
or
button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
When the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When your food is ready, switch off the appli-
‒
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
is highlighted on the display.
Requirement:
Use the
or
button to delay the end time.
▶
a The appliance applies the change after a few
seconds.
10
Programme
The programmes help you to use your appliance to
prepare different dishes by selecting the optimum set-
tings automatically.
10.1 Cookware for programmes
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C.
Glass or glass ceramic cookware is best. The joint
should cover approx. two thirds of the cookware base.
10.2 Programme table
The programme numbers are assigned to specific foods.
The weight can be set to between 0.5 kg and 2.5 kg.
No. Food
01 Chicken, unstuffed
Ready to cook,
seasoned
12
is highlighted
button.
Cookware
Weight setting
Roasting dish with
Chicken weight
glass lid
Cancelling the end time
You can delete the set end at any time.
is highlighted on the display.
Requirement:
Reset the end time to the current time plus the set
▶
cooking time using the
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
9.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position .
Use the
or
button to set the time.
1.
Press the
button.
2.
a The time that is set appears on the display.
Tip: You can go to the "basic settings" → Page 14 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement: The function selector must be set to the
"Off" position .
Press the
button repeatedly until
1.
in the display.
Use the
or
button to change the time.
2.
a The appliance applies the change after a few
seconds.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
Add liquid
No
button.
is highlighted
Shelf
Information
posi-
tions
2
Place in the cook-
ware with the breast
facing up