Electrolux 115 V 60 Hz Washer Panduan Pemilik - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin cuci Electrolux 115 V 60 Hz Washer. Electrolux 115 V 60 Hz Washer 20 halaman.
Halaman Cetak
Connecting drain and electrical
1.
Form a "U" shape on the end of the drain hose with the hose
pointed toward the drain. Place the formed end in a laundry
tub or a standpipe and secure with a cable tie provided in the
enclosure package.
2.
Place the hook end of the drain hose in the drain opening.
Secure the drain hose with the cable tie (provided in the
enclosure package) to the standpipe, inlet hose, laundry tub,
etc. so the hose does not pull out from the force of the water.
The standpipe inside diameter must be 1-1/4" (3.2
cm) minimum. There must be an air gap around the drain hose
in the standpipe. A snug hose fi t can cause a siphoning action.
Check to ensure the power is off at circuit
breaker/fuse box before plugging the power cord into outlet.
3.
Plug the power cord into a grounded outlet.
Grounding type
Grounding type
wall receptacl
wa
ll receptacle
Po Power cord with
wer cord with
3-prong
3-prong gr grounded plug
4.
Turn on the power at circuit breaker/fuse box.
5.
Carefully slide the washer to its fi nal position. Recheck for level
and rock corners for stability.
6.
Read the Use & Care Guide provided with the washer. It
contains valuable and helpful information that will save you
time and money.
7.
Run the washer through a complete cycle, checking for water
leaks and proper operation.
8.
If you have any questions during initial operation, please review
the "Service Prevention Checklist" in your Use & Care Guide
before calling for service.
9.
Place these instructions in a location near the washer for future
reference.
A wiring diagram and technical data sheet are
located inside the washer console.
If replacements parts are needed for your washer, contact the
source where you purchased your washer.
Do not, under
Do not,
under
an any cir
y circumstances,
cumstances,
cut, remo
cut,
remove ve,
or bypass th
or b
ypass the
gr grounding pr
ounding prong.
ong.
ounded plug
Replacement parts:
CABLE TIE
- ELECTRICAL SHOCK HAZARD - Label all
wires prior to disconnection when servicing controls. Wiring
errors can cause improper and dangerous operation. Verify
proper operation after servicing.
18