Electrolux 506062 Manual - Halaman 25

Jelajahi secara online atau unduh pdf Manual untuk Mesin cuci Electrolux 506062. Electrolux 506062 28 halaman.

Halaman Cetak

The appliance is then ready for use:

•

Open the door.

•

Pour the required amount of detergent non-foaming

into the tank.

•

Insert the dirty items and containers upside down

on the basket.

•

Arrange items in the rack.

RIncrease / decrease the water pressure

For washing light items:

unscrew the wing nut "X" (Figure 19);

press the limiting valve "Y" (Figure 19) inward to

reduce the water pressure in the lower wash arm

and thus increase the water pressure in the upper

wash arm, so that the items remain in their position.

retighten the wing nut "X" (Figure 19).

For washing large and heavy items:

unscrew the wing nut "X" (Figure 19);

remove the limiting valve "Y" (Figure 19);

retighten the wing nut "X" (Figure 19).

Figure 19 Wash water pressure adjustment

•

Close the door and select the suitable wash cycle;

the corresponding indicator light comes on and the

wash cycle starts.

Usable wash cycles:

- Automatic cycle I

For lightly soiled items: press button "G" (see Table 2

"Control panel" and table of times).

- Automatic cycle II (recommended)

For normally dirty items: press button "H"(see Table 2

"Control panel" and table of times).

- Automatic cycle III

For very dirty items: press button "I" (see Table 2 "Con-

trol panel" and table of times).

- Manual cycle IV

For particularly heavy dirty items or for other specific

needs of the user: press button "L" (see Table 2 "Con-

trol panel"), which initiates a continuous wash until the

operator selects an automatic cycle.

•

To stop the wash cycle, just press the selected cycle

button or open the door.

•

To continue the wash cycle, just press the selected

cycle button or close the door. The cycle starts

again from where it stopped.

•

At the end of the wash, the appliance emits a series

of beeps and "END" blinks on the display:

End

open the door and remove the basket containing

the clean items.

IMPORTANT

The use of "foaming"/non-specific detergents or in

any case detergents used in different ways from that

prescribed by the manufacturer, can cause damage

to the appliance and compromise washing results.

IMPORTANT

Failure to remove the residuals of detergent possibly

used for manual prewash can cause malfunctioning

of the appliance and compromise washing results.

Change the water in the tank at least twice a day.

Loading the racks provided

Figure 20 Basket for items

Figure 21 Tray rack

Alarms

In case of a generic appliance fault, the display shows

the relevant alarm code.