Electrolux 816 Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Mesin cuci Electrolux 816. Electrolux 816 23 halaman.

Section C

Start/Pause

This pad is used to start, stop and continue the wash programme.

If you have started a wash programme and wish to stop it for

some reason, then press the START/PAUSE pad. You can then

change the wash programme while the washing machine is in

the pause mode.

The electronic display will show 'SP' and one of the PROGRESS

INDICATOR lights will also be flashing, indicating the stage of the

wash cycle.

Advance

To use the ADVANCE pad the washing machine must be in the

PAUSE mode.

Simply press the START/PAUSE pad, then pressing the ADVANCE

pad will advance the wash programme through the cycle.

eg.

The PROGRESS INDICATOR lights will now show what stage the

wash programme has been advanced to.

The SPIN indicator light will always remain ON while using the

ADVANCE button or until the end of the wash programme.

The time remaining to complete the cycle will be shown by the

electronic display.

The ADVANCE pad is also used to programme your favourite wash

programme, see (Favourite Wash Programme) page 12.

Electronic Display

The electronic display will show the following codes for your

information:

NOTE:

WASH-->ECO RINSE-->SPIN.

'ob' Indicates the washing machine has gone out of

balance during the spin cycle.

'dd' Indicates the washing machine is at the end of the

drip dry cycle.

'Ld' Indicates the washing machine lid is open.

'FC' Indicates that you are programming a favourite cycle.

'SP' Indicates the washing machine is in pause mode.

'dE' Indicates the washing machine is set for a delay start.

'Fn' Indicates that the washing machine has finished the

wash programme.

Other codes may be shown indicating a fault with the

washing machine, inlet hoses, pump or outlet hose.

Refer to page 22 & 23 for further information.