Bosch HBA5415 0A Series Buku Petunjuk - Halaman 12

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Oven Bosch HBA5415 0A Series. Bosch HBA5415 0A Series 28 halaman.

Halaman Cetak

Changing the basic settings

Your oven has various basic settings. These settings can be

customised to suit your requirements.

Basic setting

c1 Clock display

c2 Signal duration upon

completion of a

cooking time or

timer period

c3 Waiting time until a

setting is applied

* Factory setting

No other time-setting option should have been set.

Cleaning system

The cleaning system regenerates the self-cleaning surfaces in

the cooking compartment.

The back wall, ceiling and side walls of the cooking

compartment are coated with a highly porous ceramic layer.

This coating absorbs and disintegrates splashes from baking

and roasting while the oven is in operation. If these self-

cleaning surfaces no longer clean themselves adequately, they

can be regenerated with the cleaning system.

Before cleaning

Remove accessories and cookware from the cooking

compartment.

Cleaning the cooking compartment floor

Before you set the cleaning system, clean the surfaces in the

cooking compartment that are not self-cleaning. Otherwise,

stains will develop that it is not possible to remove.

Use a dish cloth and hot soapy water or a vinegar solution. If

there are heavy deposits of dirt, use a stainless steel scouring

pad or oven cleaner. Only use when the cooking compartment

is cold. Never treat the self-cleaning surfaces with a scouring

pad or oven cleaner.

Making settings

Cleaning takes approximately one hour.

Set the function selector to

Set the temperature selector to

Press the

button twice.

The

symbol appears in brackets.

Use the

button to set the time to 1:00.

The display shows the time at which the cleaning will finish and

the

symbol is in brackets. Cleaning will start after a few

seconds. You will see the time counting down and the

symbol will be in brackets. The

Cleaning is finished

A signal sounds. The oven stops heating. 00:00 is shown in the

display. Press the

button twice and turn the function selector

to the off position. The oven switches off.

Selection 1 Selection 2 Selection 3

always*

only with

the

but-

ton

approx.

10 second

2 minutes*

5 minutes

approx.

2 seconds

5 seconds*

10 second

3D hot air.

symbol goes out.

Press and hold the

The current basic setting for the clock display is shown in the

display, e.g. c1 1 for selection 1.

Use the

Confirm by pressing the

The next basic setting appears in the display. You can scroll

through all levels with the

with the

To finish, press and hold the

All basic settings are applied.

You may change the basic settings at any time.

Cancelling cleaning

Use the

button to set the time back to 00:00 and turn the

function selector to the off position. The oven switches off.

Setting a later end time

You can delay the time at which the cleaning programme is due

to finish. For instance, you can set the cleaning programme to

run at night so that you can use your oven during the day.

Make the settings as described in steps 1 to 4. Before cleaning

starts, use the

The oven switches to standby. The display shows the time at

which the cleaning will finish and the

When cleaning starts, you can see the time counting down in

the display and the

goes out.

After cleaning

When the cooking compartment has cooled down completely,

wipe the salt residues off the self-cleaning surfaces with a

damp cloth.

button for approx. 4 seconds.

button to change the basic setting.

button.

button and change the setting

button.

button for approx. 4 seconds.

button to set a later end time.

symbol is in brackets.

symbol is in brackets. The

symbol