Bosch HBA574EB0A Panduan Pengguna dan Petunjuk Instalasi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Petunjuk Instalasi untuk Oven Bosch HBA574EB0A. Bosch HBA574EB0A 32 halaman.

Halaman Cetak
Fault
flashes in the display and the
appliance will not start.
appears in the display.
A message with  appears in the
display, e.g.
-
.
18.2 Replacing the oven light bulb
If the light in the cooking compartment fails, change
the oven light bulb.
Note: Heat-resistant, 40-watt, 230 V halogen bulbs are
available from the after-sales service or specialist retail-
ers. Only use these bulbs. Hold the new halogen bulbs
only with a clean, dry towel. This increases the service
life of the bulb.
WARNING ‒ Risk of burns!
The appliance gets very hot.
Never touch the inside surfaces of the cooking com-
▶
partment or the heating elements while they are hot.
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket contacts are
live.
Before replacing the bulb, unplug the appliance
▶
from the mains or switch off the circuit breaker in
the fuse box.
Requirements
¡ The appliance is disconnected from the power sup-
ply.
¡ The cooking compartment has cooled down.
¡ You have a new halogen bulb to replace the old one.
19  Disposal
Find out here how to dispose of old appliances cor-
rectly.
19.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
Unplug the appliance from the mains.
1.
Cut through the power cord.
2.
Dispose of the appliance in an environmentally
3.
friendly manner.
Cause and troubleshooting
The cooking compartment is too hot for the selected operation.
1.
Switch off the appliance and allow it to cool down.
Restart the operation.
2.
The maximum cooking time has been reached. To prevent an unwanted per-
manent operation, the appliance automatically stops heating after several hours
if the settings are unchanged.
Switch off the appliance.
▶
You can configure new settings if required.
Tip: To prevent the appliance from switching off when you do not want it to,
e.g. for an extremely long preparation time, set a cooking time.
→ "Time-setting options", Page 11
Electronics fault
Press the
 button.
1.
If required, reset the time.
‒
a If the fault was a one-off, the error message disappears.
2.
If the error message appears again, call the after-sales service. Quote the ex-
act error message and the E no. of your appliance.
→ "Customer Service", Page 24
Place a tea towel in the cooking compartment to
1.
prevent damage.
Turn the glass cover anti-clockwise to remove it  ⁠ .
2.
Pull out the halogen bulb without turning it  ⁠ .
3.
Insert the new halogen lamp and press it firmly into
4.
the socket.
Make sure the pins are positioned correctly.
5.
Depending on the appliance model, the glass cover
may have a sealing ring. Put the sealing ring in posi-
tion.
Screw the glass cover on.
6.
Take the tea towel out of the cooking compartment.
7.
Connect the appliance to the power supply.
8.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
Disposal en
23