Electrolux EA2F6840CF Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci Electrolux EA2F6840CF. Electrolux EA2F6840CF 36 halaman.

Halaman Cetak

4. Remove the three transit bolts and

pull out the plastic spacers.

5. Put the plastic caps, that you find in

the user manual bag, in the holes.

We recommend that

you keep the

packaging and the

transit bolts for any

transport of the

appliance.

5.2 Information for installation

Positioning and levelling

Adjust the appliance correctly to prevent

vibration, noise and movement of the

appliance when it operates.

1. Install the appliance on a flat hard

floor. The appliance must be levelled and

stable. Make sure that the appliance

does not touch the wall or other units and

there is air circulation below the

appliance.

2. Loosen or tighten the feet to adjust the

level. All feet must rest firmly on the floor.

WARNING!

Do not put cardboard, wood

or equivalent materials

below the appliance feet to

adjust the level.

The inlet hose

CAUTION!

Make sure there is no

damage to hoses and there

are no leaks from the

couplings. Do not use an

extension hose if the inlet

hose is too short. Contact

the service centre for a

replacement inlet hose.

1. Connect the water inlet hose to the

back of the appliance.

45º

20º

2. Position it toward left or right

depending on the positon of the water

tap. Make sure that the inlet hose is not

in vertical position.

3. If necessary, loosen the ring nut to set

it in the correct position.

4. Connect the water inlet hose to the

cold water tap with 3/4'' thread.

WARNING!

The inlet water shall not

exceed 25 °C.

ENGLISH