Bdcom S2510PB Panduan Pemasangan Perangkat Keras - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Beralih Bdcom S2510PB. Bdcom S2510PB 19 halaman.

After the brackets are installed, install the switch on the cabinet. See Figure 3-2.

3.3 Connecting the Port

3.3.1

The switch of S2510PB has a Console port. The rate of the console port is a value of

1200bps—115200bps. It has a standard RJ45 plug. After you connect the console port to the

serial port of PC through a console cable, you can configure and monitor the switch of

S2510PB by running a terminal emulation software, such as super Windows terminal. The

cable is provided according to the host. The communication parameters of the terminal serial

port can be set to a rate of 9600bps, eight data bits, one stop bit, no sum check bit and traffic

control.

The RJ45 connector of the console port is shown in the following figure. The RJ45 plug

corresponds to the RJ45 socket, whose pins can be aligned from left to right with the value

from 1 to 8.

Figure 3- 1 Fixing the machine box of the switch

Figure 3- 2 Installing the switch on the cabinet

Figure 3- 3 RJ-45 connector of the console port

S2510PB Hardware Installation Manual

- 9 -