Draytek Vigor 3300 Series Panduan Memulai Cepat dan Rekomendasi Keselamatan
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat dan Rekomendasi Keselamatan untuk Beralih Draytek Vigor 3300 Series. Draytek Vigor 3300 Series 4 halaman. Broadband voip / security / load balancer router
Juga untuk Draytek Vigor 3300 Series: Brosur & Spesifikasi (4 halaman), Pernyataan Kesesuaian (1 halaman), Panduan Pemecahan Masalah (12 halaman)
Halaman CetakQuick Start Guide and Safety Recommendations
Vigor3300 Series
To ensure secure and reliable Internet access over
enterprise networks, Vigor3300 is a comprehensive NAT,
optional security suite combining firewall, VPN, URL content
filtering facilities, as well as bandwidth management, and
VoIP capabilities. The application scenario is shown as
follows.
1. Installation and LED Indications
1.1 At first step, connect the power cord to Vigor3300's
power port, and the plug the power cord into an electrical
outlet. The PWR LED should be ON. After the system test
is complete, the ACT LED will light up and start blinking.
1.2 Connect one end of an Ethernet cable to one of the 4
LAN ports on the front of Vigor3300. Connect the other
end to the Ethernet port on your PC. The LAN LED on the
front panel will light up.
Broadband VoIP/Security/Load Balancer Router
The guide provides three sections of Vigor3300 series basic
indications and configurations.
The content covers the following topics:
• Installation and LED Indications
• Basic Settings
• Safety Recommendations and Warranty
1.3 Connect your broadband modem/router's Ethernet cable
to the WAN1 port of Vigor3300, and then check the
WAN1 LED status. The WAN1 LED will light up.
1.4 Check the LED on VoIP modules. The LED will light up,
which means "In-Service".
(Panel LEDs)
(Panel FXS)
(Panel FXO)