Bdcom S2008 Panduan Pemasangan Perangkat Keras - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Router Jaringan Bdcom S2008. Bdcom S2008 16 halaman.

This section explains the detail of BDCOM S2008 Switch installation:

Warning:

Only qualified mechanics are allowed to install or replace the device.

Tools and devices needed for BDCOM S2008 switch are optional devices. Users have to buy according

to their needs. The following tools and devices are typical for BDCOM S2008 switch:

screw driver

static ring

screws

ethernet Cable

other Ethernet terminal devices

console terminal

Switches can be place on the table, mounting or other surfaces. To install your network correctly,

follow the steps in this section. The content includes:

3.2.1

BDCOM S2008 Switch can be placed on a smooth and safe desk.

Note:

Do not press on the switch.Any pressure more than 4.5kg may cause damage to switch.

3.2.2

Switches are mounted on the mounting with brackets.Fixed the mounting and the switches face the

front.Operate follows:

Mount the switch after the brackets are fixed. Refer to the following illustration:

Chapter 3 Installing switch

BDCOM S2008 Switch Hardware Installation Guide

- 7 -