Draytek VigorSwitch G2280 Panduan Memulai Cepat - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Draytek VigorSwitch G2280. Draytek VigorSwitch G2280 14 halaman. L2 managed gigabit switch
Halaman Cetak
LNK/ACT)
Blinking
Off
On (Green) The device is connected with 1000Mbps.
SFP LNK/ACT
On
(Amber)
Blinking
Off
Interface
RJ 45 LNK/ACT Port 1 ~ 24
PoE for Port 1 ~ 24
(for P2280)
SFP LNK/ACT Port 25 ~ 28
Console
Note
The following limitation is suitable for VigorSwitch P2280
Power Output --
IEEE 802.3af Max. 15.4W Output Supported
IEEE 802.3at Max. 30W Output Supported
PoE Power Budget –-
340 Watts (Max)
The system is sending or receiving data
through the port.
The port is disconnected or the link is failed.
The device is connected with 10/100Mbps.
The system is sending or receiving data
through the port.
The port is disconnected or the link is failed.
Description
Port 1 to Port 24 can be used for Ethernet
connection and PoE connection, depending on
the device connected
Port 25 to Port 28 are used for fiber
connection.
Used to perform telnet command control.
Power inlet for AC input (100~240V/AC,
50/60Hz).
3
.