Electrolux EW 770 F Buklet Instruksi - Halaman 13

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Electrolux EW 770 F. Electrolux EW 770 F 21 halaman.
Juga untuk Electrolux EW 770 F: Buklet Instruksi (21 halaman)

Halaman Cetak

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment

of the detergent drawer in order to activate the

ECO valve. Then run the cotton cycle 60°E, with the

machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the "Prewash" or a "Stain

phase", pour detergent into the appropriate

compartment marked

3. Measure out the additive

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

4. Select the desired programme

Turn the programme selector dial to the desired

position.

The light corresponding to the max spin speed for

the selected programme illuminates and the light of

the Start/Pause button starts to flash.

5. Select the required option(s)

The light corresponding to the depressed button

illuminates.

When selecting the Rinse Hold option the water of

the last rinse is not emptied out, to prevent the

fabrics from creasing.

6. Reduce eventually the spin speed

Press the Spin Reduction button repeatedly to

reduce the spin speed.

The relevant light illuminates.

EW 770 F