Electrolux EW6F3844BB Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci Electrolux EW6F3844BB. Electrolux EW6F3844BB 36 halaman.

8. Put the plastic caps, that you find in

the user manual bag, in the holes.

We recommend that you

keep the packaging and

the transit bolts for any

transport of the appliance.

3.2 Positioning and levelling

Adjust the appliance correctly to prevent

vibration, noise and movement of the

appliance when it operates.

1. Install the appliance on a flat hard

floor. The appliance must be levelled

and stable. Make sure that the

appliance does not touch the wall or

other units and there is air circulation

below the appliance.

2. Loosen or tighten the feet to adjust

the level. All feet must rest firmly on

the floor.

3.3 The inlet hose

1. Connect the water inlet hose to the

back of the appliance.

2. Position it toward left or right

depending on the position of the

water tap. Make sure that the inlet

hose is not in vertical position.

3. If necessary, loosen the ring nut to

set it in the correct position.

4. Connect the water inlet hose to the

cold water tap with 3/4'' thread.

WARNING!

Do not put cardboard,

wood or equivalent

materials below the

appliance feet to adjust

the level.

WARNING!

Make sure there is no

damage to hoses and there

are no leaks from the

couplings. Do not use an

extension hose if the inlet

hose is too short. Contact

the service centre for a

replacement inlet hose.

ENGLISH