Draytek VigorAP 802 Panduan Memulai Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Titik Akses Nirkabel Draytek VigorAP 802. Draytek VigorAP 802 9 halaman. 802.11ac dual-band wall plug ap
Juga untuk Draytek VigorAP 802: Panduan Memulai Cepat (11 halaman)
Halaman Cetak
Installation
This section will guide you to install the AP and make configuration for VigorAP.
3.1 Connected As a Mesh Node (in Mesh Network)
Plug VigorAP into a power outlet.
As a mesh node, settings related to VigorAP 802 must be configured by a
remote Mesh Root (e.g., VigorAP 903) within the mesh network. The user
must detect VigorAP 802 via a Mesh Root to add it as a mesh node.
3.2 Connected As an Access Point
As an access point, VigorAP 802 must be connected to a router and configured in AP
(Access Point) / Range Extender mode.
Plug VigorAP into a power outlet.
Use a twisted-pair cable with RJ-45 plugs at both ends, and plug into
Ethernet device (e.g., Vigor router) and Ethernet port of VigorAP.