1RT DTK4400 Panduan Pemilik - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk VCR 1RT DTK4400. 1RT DTK4400 8 halaman.
PRECAUTIONS
INSTALL LOCATION
For safety and optimum performance of your VCR:
• Install the VCR in a horizontal and stable position.
Do not place anything directly on top of the VCR.
Do not place the VCR directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes
on the sides of the VCR. Avoid locations subject to
strong vibration or strong magnetic fields.
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on your VCR, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the VCR
cassette holder.
MOISTURE CONDENSATION WARNING
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating
a cold room or under conditions of high humidity. Do not
use the VCR at least for 2 hours until its inside is dry.
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized recording or use of broadcast television
programming, video tape, film or other copyrighted material
may violate applicable copyright laws. We assume no
responsibility for the unauthorized duplication, use, or other
acts which infringe upon the rights of copyright owners.
A NOTE ABOUT RECYCLING
This product's packaging materials are recyclable
and can be reused. Please dispose of any materials
in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated
but disposed of in accordance with your local
regulations concerning chemical wastes.
DESCRIPTION OF CONTROLS
Front Panel
POWER
VCR/TV
VIDEO
AUDIO
16
15
14
13
1. Cassette Compartment
2. STOP/EJECT button
3. REW button
4. PLAY button
5. PAUSE/STILL button
6. F.FWD button
7. MENU button
8. REC/OTR button
Display Window
17
18
19
17. POWER indicator
18. TAPE IN indicator
19. VCR indicator
Rear Panel
23
23. AC Power Cord
24. AUDIO OUT jack
25. AUDIO IN jack
26. ANT. IN jack
Remote Control
POWER
VCR/TV
1
1
2
3
4
5
6
CHANNEL
2
7
8
9
0
+100
MENU
SEARCH MODE
3
DISPLAY SLOW
EXIT COUNTER
4
RESET
PLAY
5
REW
F.FWD
6
7
STOP
PAUSE/STILL
RECORD
8
To insert the batteries
Install two AA
batteries matching
the polarity indicated
inside the battery
compartment.
– 2 –
1
TAPE
CHANNEL
SPEED
12
11
10
9
9. CHANNEL
10. TAPE SPEED button
11. Display Window
12. Remote Sensor
13. VCR/TV button
14. POWER button
15. AUDIO Input jack
16. VIDEO Input jack
20
21
22
20. REC indicator
21. TIMER indicator
22. CLOCK indicator
27. VIDEO OUT jack
28. VIDEO IN jack
29. CH3/CH4 selector switch
30. ANT. OUT jack
1. POWER button
2. NUMBER buttons
3. MENU button
EJECT
17
4. DISPLAY button
16
5. SLOW button
15
6. REW button
7. STOP button
8. RECORD button
14
13
9. PAUSE/STILL button
12
10. F.FWD button
MEMORY
11
11. PLAY button
12. COUNTER/MEMORY button
10
13. EXIT/RESET button
14. SEARCH MODE button
9
15. CHANNEL
16. VCR/TV button
17. EJECT button
2 3 4
5 6
PLAY
REW
PAUSE/STILL
F.FWD
REC/OTR
MENU
STOP/EJECT
8
7
(
)
buttons
24
25 26
ANT
IN
AUDIO
OUT
IN
OUT
CH3 CH4
VIDEO
27 28
29
30
(
)
buttons
EN