BDS MABasic 200 Petunjuk Pengoperasian Asli - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian Asli untuk Bor BDS MABasic 200. BDS MABasic 200 20 halaman.
Juga untuk BDS MABasic 200: Terjemahan Petunjuk Pengoperasian Asli (20 halaman)
Halaman Cetak
Safety
Danger of electric shock
DANGER
Electric shock hazard!
Contact with live wires or components
can lead to serious injury or even
death!
Observe the following safety precautions
to avoid any danger from electric current:
►
Do not open the housing of the
machine. Risk of electric shock if live
terminals are touched.
►
Never immerse the machine or the
plug into water or other liquids.
►
Only use extension cables or cable
drums with a cable cross-section of 1.5
mm².
►
Only use extension cables that are ap-
proved for the place of work.
►
Check the condition of the extension
cable regularly and replace if dam-
aged.
►
Avoid direct body contact with ground-
ed parts (e.g., tubes, radiators, steel
girders) to reduce the risk of electric
shock in the event of a defect.
►
When using the machine outside or in
a humid environment, an RCD (residu-
al circuit device) must be used.
6
Risk of injury
WARNING
Improper handling of the machine
increases the risk of injury!
Observe the following safety precautions
to avoid injuring yourself and/or others:
►
Operate the machine only with the pro-
tective equipment stipulated in these
operating instructions (see Personal
protective equipment section).
►
Do not wear protective gloves when
the machine is running. A glove can
be caught by the drilling machine and
torn off the hand. Risk of losing one or
more fingers.
►
Remove loose jewellery before begin-
ning work. Wear a hair net if you have
long hair.
►
Always switch off the machine before
changing tools, performing main-
tenance or cleaning. Wait until the
machine has come to a complete
standstill.
►
Always remove the plug from the
mains socket before changing tools,
cleaning or performing maintenance
work in order to avoid unintentional
starting of the machine.
►
Do not put your hand into the machine
while it is in operation. Remove swarf
only when the machine is at a stand-
still. Wear protective gloves when
removing swarf.
►
When working on scaffolding, the
operator must be secured with a safety
belt as the machine can oscillate dan-
gerously in the event of interruption to
the power supply.
MABasic 200, 400, 450, 850
GB