Drazice NADO 500/200v7 Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pemanas Air Drazice NADO 500/200v7. Drazice NADO 500/200v7 10 halaman. Storage tanks
Juga untuk Drazice NADO 500/200v7: Panduan Pengoperasian dan Pemasangan (6 halaman), Panduan Pengoperasian dan Pemasangan (6 halaman)

Drazice NADO 500/200v7 Panduan Instalasi

4 IMPORTANT WARNING

Connection of the inner vessel to HSW must comply with ČSN 060830, a safety valve has
to be fitted on the cold water inlet.
Recommended operating pressure of hot water circle is 0.4 MPa. We recommend installing
return valve and an expansion vessel (min. 4 % of hot water in pipeline) on hot water outlet
to eliminate back pressure impacts.
We recommend checking and cleaning the inner vessel from scale and eventual replacement
of the anode rod after two years of operation. The anode life is theoretically calculated for two
years of operation; however, it changes with water hardness and chemical composition
in the place of use.
Prior to commissioning, we recommend that you run the heating circuit and any impurities
that are trapped in the filter clean, then the system is fully operational.
Shut down the reservoir cold water intake if you are not using the reservoir for longer than 24
hours or if the object with the heater is without presence of any person.
- 6 -