Alen Paralda Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembersih Udara Alen Paralda. Alen Paralda 12 halaman. Hepa air purifier
Juga untuk Alen Paralda: Panduan Pengguna (12 halaman), Panduan Pengguna (9 halaman), Panduan Pengguna (7 halaman), Panduan Pengguna (10 halaman)

Halaman Cetak

PRogRAMMINg THE PARALdA

The Paralda can be programmed to run at certain fan speeds at three pre-set times through-

out the day. This is done in the program mode. When in the Program Mode, one of the

three settings directly below the clock will be illuminated (1, 2, or 3). When in Manual

Mode, the settings are not illuminated and the air purifier will operate continuously at the

current fan speed. This is your visual indication for which mode you are using. When first

turned on the air purifier will be in manual mode. To change back to Manual Mode from

Program Mode simply press the unit off and turn back on.

To Program Your Paralda

Press and hold PGM key for two seconds to enter the setup mode. The unit will beep

and the clock with then blink. The current time will turn on.

Press +/- to change the time.

Press the PGM key to accept the current time. The current time turns off and the set-

ting 1 icon turns on. The clock will start blinking.

Press +/- to change the time for setting 1.

Press the PGM key to accept the time for setting 1.

Press the SPEED button to select the fan speed for setting 1. This is the speed you

want the fan to run for the first preset time of the day.

Press the PGM key to accept the fan speed for setting 1.

Press +/- to change the time for setting 2.

Press the PGM key to accept the time for setting 2.

10. Press the SPEED button to select the fan speed for setting 2. This is the speed you

want the fan to run for the second preset time of the day.

11. Press the PGM key to accept the fan speed for setting 2.

12. Press +/- to change the time for setting 3.

13. Press the PGM key to accept the time for setting 3.

Helping People Live Better