Drazice OKCE 160 NTR Panduan Pengoperasian dan Pemasangan - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemasangan untuk Ketel uap Drazice OKCE 160 NTR. Drazice OKCE 160 NTR 18 halaman. Tank-type water heater for vertical
mounting
Juga untuk Drazice OKCE 160 NTR: Panduan Pengoperasian dan Instalasi (13 halaman), Panduan Pengoperasian dan Instalasi (19 halaman)
Halaman Cetak
3 OPERATION OF THERMOSTAT
3.1 SERVICING
3.1.1 SERVICE HEATER DEVICES
The service devices are located under the plastic guard of the control panel (Figure 8).
Thermostat knob
3.1.2 TEMPERATURE SETTING
Water temperature is set by turning the thermostat knob. The desired symbol is adjusted against the fixed
point on the control panel (Figure 9).
temperature range lower
limit (around 5°C)
fixed point on control panel
"antifrost
temperature"
(around 8°C)
Adjusting the thermostat selector to the left backstop does not mean permanent shutoff
pevný bod na ovládacím
of the heating element. When the heater is in use without blocking the daily rate, we do not
panelu
recommend the temperature to be set above 65°C. Select the "60" symbol as the minimum.
teplota „proti zamrznutí"
(kolem 8°C)
Electric circuit closing indicator lamp
Figure 8
Figure 9
Tipping plastic guard
temperature range upper
limit (around 74°C)
„ideal" temperature
(around 60°C)
„optimální" teplota
(kolem 60°C)
- 16 -