Anchor AN-30 Panduan Pemilik - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembicara Anchor AN-30. Anchor AN-30 4 halaman. Speaker monitor
Juga untuk Anchor AN-30: Lembar Spesifikasi (1 halaman), Panduan Pemilik (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemilik (14 halaman), Panduan Pemilik (12 halaman)

AN-30 Speaker Monitor Owners Manual

ARChITECTS' SPECIFICATION

The speaker monitor shall be an Anchor AN-30 or

equivalent. The general construction shall include an

injection-molded case, one 4.5" Neodymium woofer

and input terminations consisting of both 3.5 mm and

1/4" phone.

The maximum speaker dimensions shall not exceed

5.5" high, 5.5" wide and 6.5" deep. The maximum

weight shall be 1.5 pounds.

The case shall be formed by injection-molded high-

impact polycarbonate, and shall have a smooth finish

of black.

The woofer shall be magnetically shielded so as not to

cause video interference, and shall be protected by a

polycarbonate grill molded into the case.

The speaker monitor has the ability to be mounted on

walls, ceilings, equipment racks and speaker stands

with appropriate hardware and accessories.

NOTE: When connecting multiple AN-30 units (daisy

chaining) stereo cable MUST be used to avoid interference.

Waste electrical and electronic products must not be disposed of with

household waste. Please recycle where facilities exist. Check with

your Local Authority or Retailer for recycling advice.

Sb-30 SPEAkER bRACkET

Mounting the AN-30 speaker (included hardware: allen wrench & two allen head cap screws with

lock washers) to a wall, ceiling or other flat surface using the SB-30 speaker bracket.

Attention: The AN-30 only comes in Black. Picture is for illustration purposes only.

1. Attach mounting bracket securely to wall/

ceiling with pre-drilled holes.

3. Align bracket arm hole with mount-

ing hole on AN-30 case.

MADE IN USA

SIX YEAR WARRANTY

2. Remove allen head cap screws from

bracket mounts on AN-30.

4. Attach both sides of speaker

securely to mounting bracket.