Anchor AN-30U2 Panduan Pemilik - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembicara Anchor AN-30U2. Anchor AN-30U2 12 halaman.
Halaman CetakANCHORLINK: FREQUENTLY ASKED QUESTIONS
Q: What is the wireless frequency and range of the AnchorLink?
A: The AnchorLink operates on the DECT 1.9 GHz wireless frequency range. To
ensure a clear signal with zero interference, the receiver will automatically change
frequencies to a clear channel without disruption. The AnchorLink microphones
and belt packs have a wireless range of 300' or more in ideal conditions for
the Bigfoot 2, Beacon 2, Liberty 2, Go Getter 2, MegaVox 2, and Acclaim 2. The
MiniVox/AN-Mini, AN-1000X+, AN-30, and CouncilMAN have a wireless range of
150' line of sight.
Q: How do I connect my AnchorLink mic to my sound system?
A: To pair your AnchorLink wireless microphone or belt pack, simply turn on your
Anchor Audio sound system. Then turn on the sound system's microphone receiver
and hold the pairing button until the green light flashes. Next, turn on the wireless
microphone (WH-LINK) or belt pack (WB-LINK) and hold the mute button until its
red light turns off. Release the mute button then hold the mute button again until
the microphone or belt pack's green light flashes. The microphone is paired when
the green light is solid.
Q: Do I need to pair my microphone with my Anchor system for
each use?
A: You only need to pair your mic to the receiver the first time you receive your
unit then that mic will always be paired to that unit. Basically, all you have to do
moving forward is turn on your PA system along with the mic, and the two will
automatically sync together.
Q: Can I use multiple mics?
A: In an effort to simplify our systems and meet the needs of our customers, the
new AnchorLink wireless microphone receivers can pair up to two microphones
per receiver. Every unit that includes a wireless receiver noted by a U2 has the
ability to pair up to two mics with the PA system, and every unit that is noted by a
CONNECTING MULTIPLE SPEAKER MONITORS
INSTRUCTIONS
To daisy chain these units, simply connect the line out of one unit to the line in of
AN-1000X+
another. Mutliple units can be connected using this setup.
When daisy chaining multiple AN-Mini units, use a 3.5 mm (AUX) cable. Simply connect
AN-MINI
the line out of one unit to the line in of another. Mutliple units can be connected using
this setup.
When daisy chaining multiple AN-30 units, use a 3.5 mm (AUX) cable. Simply connect
AN-30
the line out of one unit to the line in of another. Mutliple units can be connected using
this setup.
MOUNTING THE SPEAKER MONITORS
RECOMMENDED BRACKET
SB-3BK+, SB-360BK+, RM-1BK+,
AN-1000X+
or RM-12BK+
AN-30 SB-30
RECOMMENDED STAND
AN-MINI SS-300
U4 has the ability to pair up to four mics.
Q: Can I control the volume on the AnchorLink mic and/or belt pack?
A: Yes! The new WH-LINK and WB-LINK feature both volume and mute buttons,
so you can mute and even adjust the volume of the microphone or belt pack to fit
your setting.
Q: What batteries does my microphone use? And how long does it last?
A: The WH-LINK and WB-LINK use two standard AA alkaline batteries. The
batteries last 8 – 10 hours of continuous use. We suggest keeping some extra
batteries with you for easy on-site battery replacement. Always better to be
prepared!
Q: Does my AnchorLink mic and/or belt pack have a warranty?
A: Anchor Audio guarantees its AnchorLink microphones and belt packs for up to
two years.
Q: Can I use other brand's wireless mics with the AnchorLink?
A: In order to achieve zero interference, we designed the AnchorLink to perform
outside of other wireless microphones, so the AnchorLink wireless platform is
specifically designed to work with Anchor Audio products only.
Q: Are the AnchorLink microphones compatible with older
Anchor Audio systems?
A: No. The new AnchorLink operates on a different wireless frequency range
than older Anchor units. If you are unsure what wireless frequency your sound
system uses, contact our Technical Support team at 800.262.4671 ext. 782 for
assistance.
INSTRUCTIONS
1. Attach mounting bracket securely to the wall/ceiling with pre-drilled holes.
2. Remove Allen head cap screws from the bracket mounts on the unit.
3. Align the bracket arm with mounting hole on unit.
4. Attach both sides of the speaker securely to mounting bracket.
INSTRUCTIONS
1. Place the AN-MINI on top of speaker stand by inserting stand into built-in mount at
bottom of AN-MINI.
RECOMMENDED CABLE
SC-50 or SC-50EX
MINI-15ST
MINI-15ST
6