HAVING TROUBLE WITH YOUR SOUND SYSTEM?
No Sound (Power LED: OFF)
No Sound (Power LED: ON)
Wireless Mic will not Connect to System
Connected Wireless Mic but No Sound
Poor Wireless Audio Quality
Excessive Feedback (Squelching)
TECHNICAL SPECIFICATIONS
(Specifications Subject to Change Without Notice)
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION POSSIBLE SOLUTIONS
• Turn POWER knob clockwise to turn ON
• Check battery level, charge battery, or plug in AC cord
• Check your source audio and turn up volume of source audio
• Make sure all cables are completely plugged in
• Turn up volume control
• Check battery level of microphone
• Un-pair all microphones from the system then re-pair the microphones
• Check the Mute button on the microphone or belt pack
• Raise volume on the microphone and system
(Solid Green LED)
• Check battery level of microphone and system
• Check battery level of microphone and system
Poor Wireless Range /
• Re-position system away from any possible interference sources
• Minimize obstructions between the system and wireless microphone
• If wireless range continues to be poor, call Anchor Audio Tech Support
• Check battery level, charge battery, or plug in AC cord
• Lower system volume
Distorted Sound
• Lower source audio volume
• Wireless belt pack - ensure Mic and/or Line Level setting is correct
• Lower the volume on the microphone (handheld or belt pack)
• Do not stand within at least 10 feet in front of the speaker with the mic(s)
• Use shielded cables
Excessive Hum or Noise
• Use a balanced microphone
TECHNICAL SPECIFICATIONS
Rated Power Output 30 watts AC/DC
Max SPL @ Rated Power 100 dB @ 1 meter
Frequency Response 100 Hz - 15 kHz ± 3 dB
Mircrophone Wireless Frequency 1.9 GHz DECT
Microphone Wireless Range 150'+ line of sight
Line Input Line level, 3.5 mm
Microphone Input 1/4" phone, Lo-Z
Line Output Line level, 3.5 mm
Speaker Type 4.5" neodymium woofer
Battery Type 10 'AA' alkaline
Dimensions (HWD) 7" x 6" x 3.5" (17.8 x 15.2 x 8.9 cm)
Weight 2.5 lbs / 0.45 Kg
6
Halaman Cetak