Anchor AN-MINIU1 Panduan Pemilik - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembicara Anchor AN-MINIU1. Anchor AN-MINIU1 4 halaman. Audio sound system
Juga untuk Anchor AN-MINIU1: Lembar Spesifikasi (1 halaman), Panduan Pemilik (7 halaman)

Halaman Cetak

A MESSAGE FROM THE OWNER

Thank you for choosing an Anchor Audio portable sound system. Our products incorporate state-of-the-art design and

the finest quality of materials and workmanship. We're proud of our products and appreciate the confidence which you

have shown by selecting an Anchor system.

I hope you'll take a few minutes to review this manual. We've incorporated several unique features into our products,

and your knowledge of how to use them will enhance the performance and your enjoyment of the system.

Janet Jacobs – President

on behalf of all Anchor Employees

GETTING STARTED

Please check your new unit carefully for any damage which may have occurred during shipment. Each Anchor product

is carefully inspected at the factory and packed in specially designed boxes for safe transport.

Notify the freight carrier immediately of any damage to the shipping box or product. Repack the unit in the original

box and wait for inspection by the carrier's claim agent. Notify your dealer of the pending freight claim.

NOTE: All damage claims must be made with freight carrier!

Returning Systems For Service or Repair

For service or repair, please contact the dealer you purchased your system from or Anchor Audio Customer Service at

(800) 262-4671 to obtain a RA (Return Authorization) number. All shipments to Anchor Audio must include an RA

number and must be shipped prepaid. C.O.D. shipments will be refused and returned at your expense.

IMPORTANT: Save the shipping box & packing materials,

they were specially designed to ship your unit!

Warranty Registration

Please go to our website (www.anchoraudio.com) and select "Warranty Registration". Completing this online registra-

tion form will activate your limited six-year warranty.

Waste electrical and electronic products must not be

disposed of with household waste.

where facilities exist. Check with your Local Authority

or Retailer for recycling advice.

Please recycle

OPERATING THE WIRELESS MICROPHONE / TRANSMITTER

CHANNEL SELECTION - HANDHELD TRANSMITTER

1. Unscrew battery cover on bottom of microphone

2. Set the CHANNEL SELECTOR dial to match the

channel setting of your receiver

3. Replace the battery cover

USING YOUR WIRELESS MICROPHONES

After you have set the transmitter channel (see above) you are ready to use your wireless microphone:

1. Body-pack transmitter users must insert the mic

plug into the transmitter jack marked MIC

2. Turn the transmitter power switch to ON

(The red LED will flash when the mic is turned

on. If the red LED stays on, the battery is low)

CAUTION: Harmful feedback may occur when walking in front of a sound system or

speaker with a wireless microphone. Always point microphone away from speakers!

REPLACE BATTERY - HANDHELD TRANSMITTER

1. Unscrew battery cover on bottom of microphone

2. Replace old batteries with 2 fresh 'AA' alkaline

batteries

3. Replace and tighten the battery cover

NOTE: Transmitter power must be OFF when changing batteries!

CHANNEL SELECTION - BODY-PACK TRANSMITTER

1. The channel selection dial is located on the

side of the transmitter

2. Set the CHANNEL selection dial to match

the channel setting of the receiver

3. Turn the AN-Mini power switch to ON

4. The RX indicators will light (one indicator at a

time lights) when the wireless signal is being

transmitted and received

REPLACE BATTERY - BODY-PACK TRANSMITTER

1. Slide open battery cover on front of transmitter

2. Replace old batteries with 2 fresh 'AA' alkaline

batteries

3. Replace and tighten the battery cover