Dream 2655PIA-DK Panduan Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Alat Musik Dream 2655PIA-DK. Dream 2655PIA-DK 20 halaman. With sam2655

Halaman Cetak

Button

Start_Stop / Transpose

Intro_Ending / Split

Style Selection / Sliders Assign Sliders Assign

Fill In_Key Start

Rhythm Only

Variation

Split:

Press the "Split" button to activate Split function. "Split" LED will turn on.

If Dual mode is activated

First selected sound in previous Dual mode is played on left of the split point (Lower sound). It is transposed

one octave up.

Second selected sound in previous Dual mode is played on right of the split point (Upper sound)

If not in Dual mode

Current selected sound is played on right of the split point (Upper sound)

Strings sound is played on left of the split point (Lower sound). It is transposed one octave up.

Default split point is G2 (MIDI note #55). Split point can be changed:

Press and hold the "Split" button, then press a key on the keyboard.

The pressed key becomes the lower note for the Upper sound. Its MIDI number is displayed.

Change the Upper sound

Press one of the 8 instrument buttons

Change the Lower sound

Press and hold the "Split" button, then press one of the 8 instrument buttons

Transpose:

Global transpose is available in the range (-12,+12 semitones)

Press and hold the "Transpose" button, then press the "Plus" or "Minus" button to specify the desired

transposition value.

The "Transpose" LED will turn on, indicating that the transpose function has been activated.

The current transpose setting will be shown in the display.

To cancel transpose, select value "0" or press again the "Transpose" button. "Transpose" LED will turn off.

Transposition value is memorised until power off.

To recall memorized transposition, press the "Transpose" button. "Transpose" LED will turn on.

Tuning:

Global tuning is available in the range (427.0, 453.0Hz)

Press "Tuning" button. The "Tuning" LED will turn on. Default value is 440.0Hz. Display shows "40.0"

Use the "Plus" or "Minus" button to specify the desired tuning value. Display is "27.0" ~ "53.0". Steps are

0.5Hz.

Press "Tuning" button to quit.

Reverb Type:

Reverb depth can be set for each instrument. Follow the steps below:

Hold the "Reverb" button pressed

Use the "Plus" and "Minus" buttons for adjusting the reverb depth in the range 1-20

Chorus:

Chorus depth can be set for each instrument. Follow the steps below:

Hold the "Chorus" button pressed

Use the "Plus" and "Minus" buttons for adjusting the chorus depth in the range 1-20

2655PIA-DK_Rev0 – User's Manual

2655PIA-DK Users Manual - Rev. 03/13

Function in

2655PIA

Transpose

Split

Tuning

Manual Drums

Touch Curve

Room1 / Room2 / Hall / Plate.

Chorus1 / Chorus2 / Short Delay.

Default Function in

2655PIA-ST

Transpose

Split

Sliders Assign

Tuning

Manual Drums

Touch Curve

Alternate Function in

2655PIA-ST

Start_Stop

Intro_Ending

Style Selection

Fill In_Key Start

Rhythm Only

Variation