Bosch 18 VE-2-LI Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Bosch 18 VE-2-LI. Bosch 18 VE-2-LI 8 halaman. Professional
Juga untuk Bosch 18 VE-2-LI: Manual Petunjuk Asli (26 halaman), Manual Petunjuk Asli (41 halaman), Manual Petunjuk Asli (25 halaman), Manual Petunjuk Asli (18 halaman)

Halaman Cetak

OBJ_BUCH-1237-001.book Page 11 Tuesday, July 27, 2010 4:18 PM

General Power Tool Safety

Warnings

Read all safety warnings and all

WARNING

instructions. Failure to follow

the warnings and instructions may result in elec-

tric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

Do not operate power tools in explosive at-

mospheres, such as in the presence of flam-

mable liquids, gases or dust. Power tools

create sparks which may ignite the dust or

fumes.

Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

Electrical safety

Power tool plugs must match the outlet.

Never modify the plug in any way. Do not

use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of elec-

tric shock.

Avoid body contact with earthed or ground-

ed surfaces, such as pipes, radiators, rang-

es and refrigerators. There is an increased

risk of electric shock if your body is earthed

or grounded.

Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the pow-

er tool. Keep cord away from heat, oil,

sharp edges and moving parts. Damaged or

entangled cords increase the risk of electric

shock.

Bosch Power Tools

When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduc-

es the risk of electric shock.

If operating a power tool in a damp location

is unavoidable, use a residual current de-

vice (RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you are

tired or under the influence of drugs, alco-

hol or medication. A moment of inattention

while operating power tools may result in se-

rious personal injury.

Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes,

hard hat, or hearing protection used for ap-

propriate conditions will reduce personal in-

juries.

Prevent unintentional starting. Ensure the

switch is in the off-position before connect-

ing to power source and/or battery pack,

picking up or carrying the tool. Carrying

power tools with your finger on the switch or

energising power tools that have the switch

on invites accidents.

Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power

tool may result in personal injury.

Do not overreach. Keep proper footing and

balance at all times. This enables better con-

trol of the power tool in unexpected situa-

tions.

Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught

in moving parts.

2 609 140 752 | (27.7.10)

English | 11