Bosch 18-2-LI Manual Petunjuk Asli - Halaman 3

Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Alat Listrik Bosch 18-2-LI. Bosch 18-2-LI 12 halaman. Gsr | gsb professional
Juga untuk Bosch 18-2-LI: Manual Petunjuk Asli (14 halaman)

Halaman Cetak

OBJ_BUCH-1116-005.book Page 9 Wednesday, September 17, 2014 10:59 AM

 Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

Battery tool use and care

 Recharge only with the charger specified by the manu-

facturer. A charger that is suitable for one type of battery

pack may create a risk of fire when used with another bat-

tery pack.

 Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a

risk of injury and fire.

 When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

 Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. Liquid ejected from the battery

may cause irritation or burns.

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Drills and Screw-

drivers

GSB 14,4-2-LI/GSB 18-2-LI

 Wear ear protectors when impact drilling. Exposure to

noise can cause hearing loss.

GSR 14,4-2-LI/GSR 18-2-LI/GSB 14,4-2-LI/

GSB 18-2-LI

 Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory

or fastener may contact hidden wiring. Cutting accesso-

ry and fasteners contacting a "live" wire may make ex-

posed metal parts of the power tool "live" and could give

the operator an electric shock.

 Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury.

 Use appropriate detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage.

 Switch off the power tool immediately when the tool in-

sert jams. Be prepared for high reaction torque that

can cause kickback. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

Bosch Power Tools

 Hold the machine with a firm grip. High reaction torque

can briefly occur while driving in and loosening screws.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

 Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

 In case of damage and improper use of the battery,

vapours may be emitted. Ventilate the area and seek

medical help in case of complaints. The vapours can

irritate the respiratory system.

 Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

 The battery can be damaged by pointed objects such as

nails or screwdrivers or by force applied externally. An

internal short circuit can occur and the battery can burn,

smoke, explode or overheat.

Additional Safety and Working

Instructions

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one's health and cause allergic reactions, lead to res-

piratory infections and/or cancer. Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-

rials to be worked.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

 The battery is supplied partially charged. To ensure full

battery capacity, completely charge the battery in the

battery charger before using for the first time.

 Read the operating instructions of the battery charger.

 Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

 Adjust the gear switch only when the machine is at a

complete stop.

 If the gear switch cannot be pushed to the stop, turn

the drill chuck a little.

To save energy, only switch the power tool on when using it.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

English | 9

1 609 92A 0X1 | (17.9.14)