Bosch 1942 Panduan Petunjuk Pengoperasian/Keselamatan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian/Keselamatan untuk Alat Listrik Bosch 1942. Bosch 1942 32 halaman. 120v heat gun
Juga untuk Bosch 1942: Daftar Bagian (2 halaman)
Halaman Cetak
BM 2610615924 2/02
Grounding Instructions For Tools With Three Prong Plugs
Improper grounding can
WARNING
!
shock, burn or electrocute.
Grounding of this tool is necessary while in
use to protect you from electric shock or
electrocution. This tool is equipped with an
approved three-conductor cord and three-
prong grounding-type plug to fit the proper
grounding-type receptacle. Do not remove
grounding prong from the three prong
grounding-type plug. The green (or green
and yellow) conductor in the cord is the
grounding wire. Never connect the green (or
green and yellow) wire to a live terminal.
Your unit is for use on less than 150 volts
and it has a plug that looks like Fig. "A".
An adapter, Fig. "B" and "C" is available for
connecting Fig. "A" plugs to two-prong
receptacles. The green colored rigid ear, lug,
etc., extending from the adapter must be
connected to a permanent ground such as a
properly grounded outlet box.
NOTE: The grounding adapter, Fig. "C" is
prohibited in Canada by Canadian Electrical
Code-Part 1. Therefore the instructions for
its use are not applicable in Canada.
If an extension cord is
WARNING
!
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-
wire extension cords that have 3-prong
plugs and receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
2/1/02
12:36 PM
Page 5
-5-
FIG. A
FIG. B
Grounding
Prong
FIG. C
FIG. D
Adapter
Grounding
Means
If your unit is for use on 150 to 250 volts, it
has a plug that looks like Fig. "D" plugs. No
adapter is available for a plug like Fig. "D".
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
25
50
100 150
3-6
18
16
16
14
6-8
18
16
14
12
8-10
18
16
14
12
10-12
16
16
14
12
12-16
14
12
—
—
Cover of Grounded
Outlet Box
Grounding
Prong
2
Wire Sizes in mm
Cord Length in Meters
15
30
60
120
.75 .75 1.5
2.5
.75 1.0 2.5
4.0
.75 1.0 2.5
4.0
1.0 2.5 4.0
—
—
—
—
—