Anchor Navi-Trac Petunjuk Perakitan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Tenda Anchor Navi-Trac. Anchor Navi-Trac 3 halaman. Tent jack
Juga untuk Anchor Navi-Trac: Panduan Pengguna (16 halaman), Panduan Pengguna (18 halaman)

Halaman Cetak
See Images "C, D, E & F"
8. While the Frame Lift is leaned over, attach the pre-assembled lifting web and winch assembly starting with the Winch Assembly
(#24) to the Bottom Post (use hdw #25, 26, 29 & 30). See images C, D and E.
9. Next, feed the web assembly to the top and insert the Web Top Weldment (#3) into the top of the Top Post (#7) and secure with
accompanying hardware. The Snap Hook (#27) should hang at the front of the Lift and can be secured to the reinforcement rod of
the base plate when not in use. See Image "G" for storage of the Frame Lift when not in use.
10. Follow the instructions in the Navi-Trac Assembly Manual for proper positioning and use of the Navi-Trac Frame Lift for assembling
and standing the Navi-Trac frame.
Warning:
Always position winch assembly as shown in
image "E". Do not attach upside down - winch
brake system may fail.
PART LIST
ITEM # QTY
1
1
BASE WELDMENT
2
2
LEG INSERT
3
1
WEB GUIDE TOP WELDMENT
4
2
BRACE WELDMENT
5
1
BOTTOM POST
6
SPLICE TOP POST
1
7
1
TOP POST
8
2
HINGE FOR BRACE
9
2
1/2" x 3" HEX HD CAP SCREW
10
4
1/2" ST'D NC NYLOCK NUT
11
2
1" POLYPRO WEB
12
1
1/2" x 3 1/4" EYE BOLT
13
1
1/2" EYE NUT
14
2
1/2" x 3 1/4" FAS PIN
15
3
1/2" x 2 3/4" TENSION LOCK PIN
16
2
1/2"-13 x 3 1/4" HEX HD CAP SCREW
18
2
WEB WITH SNAP
21
2
3 1/2" x 10 1/2" DIA. TURF WHEEL
22
2
1/2"-13 x 5" HEX HD CAP SCREW
23
2
1/2"-13 HEX NUT
24
1
WINCH ASSEMBLY
25
1
3/8"-16 x 5 1/2" HEX HD CAP SCREW
26
2
3/8"-16 UNC HEX NUT
27
1
SNAP HOOK
28
25'-6"
1 1/2" POLYESTER WEB
29
1
3/8" X 5 1/2" CARRIAGE BOLT
30
1
3/8" WASHER
DESCRIPTION
Lifting Web
Winch
Assembly
Winch Assembly
properly mounted
F
28
27
28
24
Bottom Post
5
G
3
7
24
25,26
The Top Post can be stored on
the front splice stub of the base
plate when not in use.
E