Anchor portavox Panduan Pemilik - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem stereo Anchor portavox. Anchor portavox 6 halaman. Portable
Halaman CetakThank you for choosing an Anchor Audio portable sound system. Our products
incorporate state-of-the-art design and the finest quality of materials and
workmanship. We're proud of our products and appreciate the confidence which
you have shown by selecting an Anchor system.
I hope you'll take a few of minutes to review this manual. We've incorporated
several unique features into our products, and your knowledge of how to use
them will enhance the performance and your enjoyment of the system.
David Jacobs, President on behalf of all Anchor employees
Quick Use Guide
PortaVox is an easy-to-use portable sound system that will
run for many hours on its built-in battery. You'll need a
microphone or other input source before you begin.
Make sure the battery is fully charged before use (see page 9).
Here's how easy it is to use:
1. Unhook the two speaker units from the center
Problems?
console and set them in front of your audience on
Consult the
the ground or on speaker stands.
troubleshooting
section on the
2. Plug the cable attached to each speaker into the jacks
back page of
on the console labeled SPEAKER OUTPUT.
this manual.
3. Plug a microphone into the MIC 1 or MIC 2 input,
or plug an audio source into the LINE input.
4. Set all input level controls to minimum, then turn the
power switch ON. Increase the level control adjacent
to the input used until desired volume is reached.
5. Adjust the tone control (also the power switch) for
desired sound quality.
To operate the wireless mic system on model PB-500W see
"Wireless Operation" on pages 7 - 9. And for more detailed
instructions, see the "Operation" section beginning on page 5.
2
Specifications
Rated power output:
2 x 20 watts @ 3Ω
Max SPL @ rated power:
123 dB @ 1 meter
Frequency response:
250 Hz - 10 kHz ± 4 dB
Speaker type (2)
reentrant horn
Inputs
Mic 1:
Lo-Z, unbalanced, 1/4"-phone
Mic 2:
Lo-Z, unbalanced, 1/4"-phone
(used for wireless on PB-500W)
Line input:
Hi-Z, unbalanced, 1/4"-phone
Speaker outputs (2):
supports a maximum of 2 PortaVox speakers
each.
Battery:
12 volt rechargeable, 7.0 AH
Charger (120 Volts):
16 volts AC, 1.5A, 60Hz (use RC-16 only)
Charger (220 Volts):
16 V~, 1.5A, 50/60Hz (RC-16/220 only)
Dimensions:
27 x 9.5 x 14", 69 x 24 x 35 cm
Weight:
30 pounds, 13.5 Kg.
Specifications subject to change without notice.
Date of Manufacture
The date of manufacture of this Anchor Audio product can
be determined by the seven or eight digit serial number code.
The fifth and sixth digits from the right denote the year, the
seventh digit (letter) from the right denotes the month
(A=Jan, B=Feb, etc.) Example: "XD960083" states that the
unit was manufactured in April of 1996. An "X" may or may
not exist as the eighth digit (letter) and has no significance in
the serial number or date code.
11