Anchor BIG-DUAL-HH Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Anchor BIG-DUAL-HH. Anchor BIG-DUAL-HH 17 halaman.

Halaman Cetak

ANCHOR AIR: FREQUENTLY ASKED QUESTIONS

Q: How does the AIR wireless connection work?

A: Simple! The Bigfoot includes a built-in transmitter - as designated

by the X. The Bigfoot include a built-in receiver - as designated by

the R. The AIR wireless companion speakers available in the Liberty,

Go Getter, and MegaVox have a built-in receiver. The transmitter and

receivers operate on the 902 – 928 MHz frequency with 100 user-

selectable channels. When set to the same channel, the receivers

pick up the audio signal from the transmitter.

Q: Can I use multiple AIR receiver speakers in one set up?

A: Yes, absolutely. Any X-series can transmit to an unlimited

number of AIR receiver speakers within range. All units should

be set to the same frequency to receive signal. When setting up

your arrangement, be sure to point the systems facing the same

direction – pointing the systems directly at one another may cause

distortion. Receiving units can be placed up to 300+ feet (or more

in ideal conditions) from the transmitting main unit.

Q: I am experiencing interference on all channels. Can I connect

with a cable instead of the wireless connection?

A: Yes! All Bigfoot and Beacon Anchor AIR units are main units

with either a transmitter or receiver built-in. Main units can be

daisy- chained to one another by using the line out to line in

jack. The units must have charged batteries and will not work if

batteries are dead. For the Liberty, Go Getter, and MegaVox, all

AIR units have what we call 'Wired Mode' which allows the AIR

wireless companion speaker to be used just like an unpowered

wired companion speaker. Power and audio signal are sent from

the main unit to the AIR companion speaker with a cable. Simply

power off the companion speaker, flip the switch into 'Wired

Mode, ' plug in your speaker cable (SC-50NL for Liberty & Go

Getter and SC-50 for MegaVox), and the main unit will power the

companion.

ANCHOR AIR: USEFUL INFORMATION

AIR Companion Speaker can be placed 300+ ft. from main unit.

Main unit must have built-in AIR Companion Transmitter

Main unit can support unlimited number of AIR Companion Speakers.

Although AIR has volume control, main unit volume will raise or lower AIR volume.

Transmitter may create audible white noise.

When using 2+ transmitters, larger channel spacing should reduce interference.

Do not place 2+ transmitters close to one another while set to the same channel.

Certain high powered cell towers can cause background noise on the sound system. We recommend locating the sound

system at least 50 feet from the tower or adjusting locations to minimize the noise.

Q: What is the range of the AIR wireless connection?

A: Each AIR or R-series receiver speaker can be placed up to 300+

feet from the main unit transmitter. In ideal conditions, you can

place the systems further, however, be aware of physical latency

and/or interference. If you are using multiple AIR systems, be sure to

center the main unit between all AIR companions.

Q: I am experiencing interference with my AIR wireless connection,

what can I do?

A: Oh no! You have a few options. First, try to change the channel.

There are 100 channels to choose from, so be sure to try various

frequencies to find a clear channel. You should also double check that

your speakers are close enough together to have a strong signal. Be

sure all your batteries are fully charged. Additionally, verify your inputs

all have a clear signal (such as a wireless microphone, cables, and

Bluetooth). Lastly, you can try adjusting the external antennas for a

better connection. These fixes may not work for everyone, as there

are occasional signals which cannot be avoided (for example being

close to a high-power cell tower). If none of these fixes work, please

call us - 800.262.4671 x782. We are happy to help!

Q: Since the Anchor Audio Assistive Listening Devices are also on

902 – 928 MHz, can they work together to create a simple and

reliable ADA compliant sound system?

A: Actually, yes! All X-series units will transmit to the AIR or R-series

receiver speakers as well as the ALB-9000 Assistive Listening belt

pack(s). Since all systems are shipped out by default on the 902.000

channel, simply power on your transmitter (X-series sound system)

and receivers (ALB-9000 belt packs), and you instantly have an ADA

compliant sound system. Did you know that ADA requirements

mandate compliant assistive listening systems for any theater

using audio amplification or with a capacity of at least 50 audience

members? Try this set up for the easiest solution.