Anchor BIG2EU Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Anchor BIG2EU. Anchor BIG2EU 17 halaman.

CHANGING THE FREQUENCY CHANNEL ON THE AIR COMPANION TRANSMITTER

AND AIR COMPANION RECEIVER

Using a pointed edge tool, hold SET button for 2 seconds. Digital display will blink.

Press UP or DOWN to select desired frequency.

To confirm frequency selection, press SET or wait 10 seconds for display to stop blinking.

CONNECTING ANCHOR AIR COMPANION SPEAKER VIA WIRED CONNECTION

Power off the main unit and AIR companion speaker.

On the AIR companion speaker, move toggle switch to WIRED MODE.

Insert appropriate cable into Speaker In plug. (See page 14, Connecting Multiple Sound Systems - Wired, for the correct cable for each unit.)

Using the same cable, insert the opposite end into the Speaker Out plug on the main unit.

Power on the main unit only. Do NOT power on the companion speaker. The main unit will provide power to the companion through the cable.

CONNECTING ANCHOR AIR SYSTEMS WITH ASSISTIVE LISTENING BELT PACK RECEIVERS

Connect provided external antennas to main sound system unit.

Power on main unit.

On main unit, push AIR Companion Transmitter POWER button to turn on the AIR transmitter.

Install two AA 1.5V batteries in the Assistive Listening belt pack(s) (ALB-9000).

Straighten belt pack antennas for maximum reception.

Plug in the headphones to the belt pack.

Power on Assistive Listening belt pack.

Verify the AIR Companion Transmitter and Assistive Listening belt pack are synchronized to the same channel. (Default setting is 902.00)

Adjust volume knob on back panel and belt pack as needed.

CHANGING THE FREQUENCY CHANNEL ON THE ALB-9000

Open battery compartment.

Using a pointed edge tool, press and hold SET button for 2 seconds. Belt pack receiver display will flash.

With pointed edge tool, press up or down until desired frequency is displayed.

Press SET button to confirm selection.