Anchor Bigfoot BIG-8000 Panduan Pemilik - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Anchor Bigfoot BIG-8000. Anchor Bigfoot BIG-8000 13 halaman.
Halaman CetakBigfoot® Sound System Owners Manual
CONDITION
No Sound (power LED off)
No Sound (power LED on)
Shortened Battery Life
Distorted Sound
Excessive Hum or Noise
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM? (Wireless Models Only)
CONDITION
No Sound (RX Indicator: ON)
No Sound (RX Indicator: OFF)
Rated Power Output
Max SPL @ Rated Power
Battery
Frequency Response
Line Output (post fader)
AC Power Reqs.
USB Power Out
Dimensions Closed (HWD)
Dimensions Opened (HWD) 68.6" x 15.3" x 24.0" (174 x 39 x 61cm)
Weight
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
POSSIBLE SOLUTION
• turn POWER switch ON
• charge battery or plug in AC cord
• if unit overheats it goes into "protection mode",
turn it off, lower volume, then turn back on
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• charge battery fully; if battery life continues to deteriorate,
contact Anchor Audio customer service: 800.262.4671
• lower system volume control
• use shielded cables
• use balanced microphone
POSSIBLE SOLUTION
• set MUTE switch to on (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
• push mic power button ON
• turn Bigfoot POWER switch ON
• make sure transmitter power switch is ON
• set receiver and transmitter to same channel
• replace battery in transmitter
NEED MORE HELP? Bigfoot Sound System Setup & Operation Videos!
Visit Our Website: www.anchoraudio.com
BIGFOOT TECHNICAL SPECIFICATIONS
400 Watts AC/DC
Microphone Inputs:
130 dB @ 1 meter
Three 12 V rechargeable, 9.0 Ah
Full recharge: approx 8 hrs
Line In
100 Hz – 15 kHz ± 3dB
Sensitivity For Rated Output
isolated, 600 W, 1/4" phone
Lo-Z Microphone
100 – 240 VAC, 50/60 Hz, 300W max
Hi-Z Microphone
5V 500mA
Auxiliary (line)
42.3" x 15.3" x 24.0" (107 x 39 x 61cm)
75 lbs / 34 Kg
(Specifications Subject to Change Without Notice)
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
Anchor Audio products are warranted to be free from defects in materials and
workmanship for the period of SIX (6) YEARS from the date of original purchase
unless listed below, which are warranted for a period of TWO (2) YEARS:
- All wired and wireless microphones, beltpack transmitters, base station
transmitters, base station receivers, and hands-free microphones
- Rechargeable batteries
- All woodworking
- CouncilMAN microphones and bases
- PortaCom and ProLink 500 systems in their entirety
- Assistive Listening systems in their entirety
- Accessories, cables, cases, and covers
Warranties are subject to the following conditions:
- Product must have been purchased from an authorized Anchor Audio Dealer
- Anchor Audio must perform or authorize all warranty services or warranty
is void
- Warranty is void when equipment is subjected to negligent use, connection to
improper power sources, misuse, and operation beyond specifications
and limits
- Warranty shall not apply to exterior finish, AC power cords, bulbs, or any other
failings due to normal wear
- Warranty is void when equipment is subjected to adverse temperature,
humidity, moisture, or any condition not considered normal
environmental conditions
Lo-Z (1 KW), balanced, XLR
12 VDC condenser mic (phantom) power
- Products out of warranty cannot be repaired by Anchor Audio
Hi-Z (10 KW), unbalanced, 1/4" phone
balanced, 1/4" & 1/8" stereo
To locate an authorized dealer near you, please contact [email protected].
Please contact Technical Support at www.AnchorAudio.com/techinical-support-
-52 dBV (2.5 mVrms)
form.html to with any questions, to begin the Return Authorization process, or to
-43 dBV (7.5 mVrms)
-14 dBV (200 mVrms)
verify your warranty period.
MADE IN USA
SIX YEAR WARRANTY
Anchor Audio Warranty
ANCHOR AUDIO CUSTOMER SERVICE
800.262.4671
FOR ADDITIONAL INFORMATION
visit www.anchoraudio.com
13