Anchor MegaVox Pro Panduan Pemilik - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Anchor MegaVox Pro. Anchor MegaVox Pro 9 halaman. Public address system
Juga untuk Anchor MegaVox Pro: Panduan Pemilik (4 halaman), Panduan Pemilik (7 halaman), Panduan Pemilik (10 halaman)
MegaVox Pro Public Address System Owners Manual
Figure DC Voltage Symbol
Figure Fuse Symbol
Figure On Symbol
O
Figure Off Symbol
European Union CE Mark European Union CE Mark
The presence of the CE Mark on Anchor equipment means that it has
been designed, tested and certified as complying with all applicable
European Union (CE) regulations and recommendations.
Direct current symbol
This international symbol implies a Direct voltage or current.
Fuse Symbol
The fuse symbol in the figure above identifies the fuse location on
the Anchor System. (Not required if not user replaceable)
On Symbol
The On Symbol in the figure above represents a power switch position
on the Anchor System. This symbol represents a Power On condition.
Off Symbol
The Off Symbol in the figure above represents a power switch position
on the Anchor System. This symbol represents a Power Off condition.
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product or on its packaging indicates that this
product must not be disposed of with regular waste. Instead, it is the
user responsibility to dispose of waste equipment according to the local
laws. The separate collection and recycling of the waste equipment
Figure WEEE Directive Symbol
at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and
the environment. For information about where the user can drop off
the waste equipment for recycling, please contact your local Anchor
representative. See Section for instructions on how to disassemble the
equipment for recycling purposes.
Inspection for Damage
The Model MegaVox Pro is carefully packaged at the factory to
minimize the possibility of damage during shipping. Inspect the box
for external signs of damage or mishandling. Inspect the contents for
damage. If there is visible damage to the instrument upon receipt,
inform the shipping company and Anchor Inc. immediately.
Do not attempt to operate this equipment if there is
evidence of shipping damage or you suspect the unit is
damaged. Damaged equipment may present additional
hazards to you. Contact Anchor technical support
for advice before attempting to plug in and operate
damaged equipment.
Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture, apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
– minimum distances around the apparatus for sufficient ventilation; the ventilation should
not be impeded by covering the ventilation openings with items, such as newspapers, table-
cloths, curtains, etc.; no naked flame sources, such as lighted candles, should be placed on
the apparatus.
– attention should be drawn to the environmental aspects of battery disposal; the use of
apparatus in tropical and/or moderate climates.
-Equipment may be located above or below this apparatus, but some equipment (like large
amplifiers) may cause an unacceptable amount of hum or may generate too much heat and
degrade the performance of this apparatus.
MADE IN USA
SIX YEAR WARRANTY
Inspection for Damage
7