Anchor Systems 46913 Petunjuk Pengoperasian Dan Informasi Teknis - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian Dan Informasi Teknis untuk Paket Daya Anchor Systems 46913. Anchor Systems 46913 16 halaman. 20-30l hydraulic power pack

Halaman Cetak

Have any questions?

01342 719 362

The Midipac has an auto-throttle function which will increase the engine output as demand

for oil pressure increases. The Midipac can operate in two modes: 20 Litres a minute; and

30 Litres a minute. To switch between 20 and 30Lpm, operate the flow selector handle on

the oil reservoir lid.

When in 30 Lpm mode the engine will automatically rev up to prevent stalling as the pressure requirements

increase.

The auto-throttle can also be locked in HIGH mode. This is done by pulling the throttle contact plate forward and

placing the 'R clip' into the nearest hole to the throttle arm.

Figure 7 -

Throttle Lock

Oil Flow Control

Figure 6 –

Flow Selector Handle

General Precautions

WARNING: Failure to follow these general safety precautions

may lead to a serious accident.

SAFETY RULES

•

Only trained and qualified personnel or personnel authorised by the company (or superior) can

operate and maintain the machine.

•

Follow all safety rules, prohibitions, precautions, procedures, and instructions when operating or

performing maintenance on the machine and pay careful attention to safety.

•

Operating the machine when you are not in good physical condition reduces the power of judgment

needed to avoid danger and leads to accidents.

•

People in the following conditions should not operate the machine.

o People who cannot operate normally because they are ill or suffering from the effects of

medication.

o People who have been drinking

o Pregnant women

SAFETY FEATURES

•

Be sure that all guards and covers are in their proper position. Have guards and covers repaired if

damaged.

•

Improper use of safety features could result in serious bodily injury or death.

PERSONAL PROTECTION

•

Avoid loose clothing, towels, jewellery, and loose long hair. They can catch on controls or in moving

parts and cause injury or death.

•

Also, do not wear oily clothes; they can easily catch fire.

•

Wear a hard hat, safety glasses, non-slip safety shoes and gloves when operating or maintaining

the machine.

UNAUTHORISED MODIFICATION

•

Any modifications made without authorisation from Anchor Systems (International) Ltd can ad-

versely affect the performance of the machine and they may also create hazards.

•

Before making a modification, consult Anchor Systems (International) Ltd. Anchor Systems (Inter-

national) Ltd will not be responsible for any injury or damage caused by any unauthorised modifi-

cation.

The safe operation of this rig is the responsibility of the operator, who should

be familiar with the principles of pile installation, the power unit, and all safety

practices before starting operations.