Electrolux EDW 2200 Panduan Servis - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Servis untuk Mesin pencuci piring Electrolux EDW 2200. Electrolux EDW 2200 18 halaman.

Functional Test Cycle

After accessed Service mode (L1, L2 and L3 blinking):

1. Press button S5 to start the test cycle. The cycle will not start if

door is opened.

L3 blinks for the duration of the test cycle.

Display shows the remaining time of test cycle.

The test cycle runs as a normal wash cycle. It can be

cancelled or run to its end.

Enable/disable Extra Rinse

After accessed Service mode (L1, L2 and L3 blinking):

1. Press button S2+S4 to enter this function.

L1 blinks indicating it is in Extra Rinse setting mode.

Display show the current setting of Extra Rinse. "0E" for

disabled, "1E" for enabled.

2. Press button S2 to change the setting.

3. Switching off the appliance will exit Service mode.

Technical Support – RA

EDW2200

Enable/disable Pulse Wash

After accessed Service mode (L1, L2 and L3 blinking):

1. Press button S4+S5 to enter this function.

L2 blinks indicating it is in Pulse Wash setting mode.

Display show the current setting of Pulse Wash. "0P" for

disabled, "1P" for enabled

2. Press button S4 to change the setting

3. Switching off the appliance will exit Service mode.

Chapter