Carlson BRx5 Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Penerima Carlson BRx5. Carlson BRx5 5 halaman. Base/rover
Juga untuk Carlson BRx5: Panduan Memulai Cepat (2 halaman)

Halaman Cetak
The BRx5 control panel overview below describes the LED and buttons in the control panel.
Diagram
Item
A
Power button
A B
B
Select button
1
UHF/GSM radio
2
GPS position
status LED
3
DGPS position
status LED
4
External power
status LED
5 and 6
Battery
status LED
7
Bluetooth
status LED
8
SD logging
status LED
This document contains confidential and proprietary information that remains the property of Carlson Software Inc.
Page 5 of 5
BRx5 Control Panel Overview
Name Description
• If unit is Off, press and hold until unit powers up (until you hear one beep)
• If unit is On, press and hold for 3 seconds (until you hear three beeps) to power off the unit
(for Bluetooth/UHF/GSM/SD modules)
Allows you to review module status or change the status (power on/off) of a module
• Off – UHF radio or GSM module is OFF; or no RTK status LED position computed
• On (yellow) – floating point RTK position achieved
• On (green) – fixed ambiguity RTK position achieved
• Blink (green) – UHF radio or GSM module transmitting/receiving data
• Pulse (red) – error condition with UHF radio or GSM Module
• Off – no position
• On (yellow) – valid position
• Blink (yellow) – operating as a base station and converging on reference coordinates
• Off – no differential corrections available
• On (green) – differentially corrected position computed
• Off – external power not present
• On (red) – external power present and in use
• Off – battery not present
• On (green) – battery charge full
• On (yellow) – battery charge < 50%
• On (red) – battery charge depleted
• Blink – battery in use
• Off – Bluetooth inactive
• On (blue) – active Bluetooth connection
• Blink (blue) - Bluetooth active and transmitting/receiving data
• Off – SD card not inserted
• On (yellow) – SD card inserted, not logging data
• Blink (yellow) - SD card inserted and reading/writing data to SD card
• Pulse (yellow) at 5 Hz - SD card inserted and low free space
Carlson Software Inc.
Carlson Software Inc.
Carlson Software Inc.
Carlson Software Inc.
102 West 2
Street
nd
Maysville, KY 41056
www.carlsonsw.com
www.carlsonsw.com
www.carlsonsw.com
www.carlsonsw.com
Phone: (606) 564-5028
Fax: (606) 564-6422
Updated 6/18/2015