Carlson 0930PW Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Perabotan Dalam Ruangan Carlson 0930PW. Carlson 0930PW 18 halaman. Walk-through assembly gate with small pet door
Juga untuk Carlson 0930PW: Petunjuk Manual (14 halaman), Panduan Pemilik (16 halaman)

Halaman Cetak

Assembling and Installing Your Gate

NOTE: You will notice a slight gap between the gate door latch and the

frame. This is not a defect. Your gate is a pressure mounted gate and

this gap will disappear once you tighten your gate in its opening.

STEP 1

Locate the (4) threaded spindle rods.

Rotate the adjustment wheels along

the threading, eliminating the gap

between the adjustment

wheel and the rubber foot.

ADJUSTMENT WHEEL

RUBBER FOOT

STEP 2

Insert the (4) threaded spindle

rods into the holes at each of

the four corners of the gate.

NOTE: The ends of the gate frame are not threaded. The threaded spindle

rods should slide into the end of the frame tubes without any resistance.

ENGLISH