Carlson 0941 PW Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Perabotan Dalam Ruangan Carlson 0941 PW. Carlson 0941 PW 16 halaman. Walk-through assembly gate with small pet door
Juga untuk Carlson 0941 PW: Petunjuk Manual (14 halaman)

Halaman Cetak

STEP 4

When you are satisfied with the general placement of your gate, fully tighten the threaded

spindle rods attached to the lower corners of the gate by further rotating the adjustment wheels.

Continue by tightening the upper threaded spindle rods. As you tighten the threaded spindle

rods, you will notice the gap between the door frame and the easy slide latch begin to narrow.

In order for the gate to function properly, stop tightening the upper threaded spindle rods just

before the outer housing of the easy slide latch and the receiving component touch.

RECEIVING COMPONENT

OUTER HOUSING

NOTE: There should be equal spacing among each of the (4) threaded spindle rods. Make the

appropriate adjustment to ensure you have installed your gate safely.

ENGLISH