Formax FD 332 Panduan Operator - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Operator untuk Mesin Lipat Formax FD 332. Formax FD 332 20 halaman. Document folder

Press the appropriate numerical key to select the

number of forms to be folded.

Example: press the number "10" key twice to select

twenty.

Note:

The batch counting number is cancelled

when the POWER is set to OFF.

Under the following conditions the machine will automatically stop feeding:

(Press the Clear/Reset key to reset after the error has been corrected)

1. When the Start/Stop key is pressed while there is no stock.

2. When the Start/Stop key is pressed while the paper feed lever is at

the upper position.

3. When the stock runs short while folding in the Batch Counting Mode.

1. When paper feed slip occurs

2. When paper jam occurs at Table 1 and Table 2

1. When paper stack table is full.

2. When paper jam occurs at the paper discharge.

Clearing a Paper Jam:

Conditions

Numerical Key

Indication on Control panel