Formax FD 452 Panduan Operator - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Kantor Formax FD 452. Formax FD 452 4 halaman. Envelope opener

Running a Job

Switch on the letter opener (I/O switch on rear side of unit).

Sort out any unsuitable pieces, i.e. plastic bags and letters

that are thicker than 4mm, or made from synthetic materials.

Tap the stack of letters (address field facing you and flap

facing up) on a flat surface several times in order to line up

the lower edges. This ensures that the contents slide down

inside the envelope and are not damaged when the

envelopes are slit open.

Turn the stack of envelopes upside down (address field

facing you but flap facing downwards). Loosen up the stack

just enough so that the top of each envelope rests on the

letter supporting surface.

* Be sure not to tap the stack again. *

Insert the prepared stack of envelopes between the

transport rollers and the pressure arm.

Press the green button to start processing.

Press the red button when all envelopes have been opened

and to stop the system.

Tips on Running a Job

Envelopes do not have to be sorted according to size, but they

should be arranged to face in one direction. To improve the

machine efficiency, large envelopes should be placed behind the

smaller ones in the letter opener.

In case large envelopes need to be opened:

Slide out and unfold the extension arm, as shown below.

Place the envelopes in landscape mode.

Proceed as above.