Alentec & Orion 24720 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur Alentec & Orion 24720. Alentec & Orion 24720 8 halaman. In line meter

Manual 24720_EN_2B

5.3. LCD segment test

The LCD can be checked by putting the meter in normal dispense mode.

Normal dispense mode.

Press <RESET> and the meter will do a re-set and

show all the segments of the LCD for a short while.

The status of the batteries is shown on the display.

Batteries OK.

Batteries LOW, needs to be replaced. Replace with 2

pieces of 1,5 IEC LR03 / ANSI AAA batteries. Be

sure to put the new ones in the correct direction!

7(8)