Common Sense RC SNAP&FLY Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mainan Common Sense RC SNAP&FLY. Common Sense RC SNAP&FLY 17 halaman. 3-in-1 rtf modular airplane system

Halaman Cetak

SNAP&FLY -- Modularized RC Airplanes

connectors (g) and (h) of the Base Module (Photo 2A1). The push/pull rod linkages are

formed by connecting the linkage rod connectors ( i) of the Base Module (Photo 2A1) to

the matching connectors (c) of the airplane module (Photo 2B2).

Photo 2B2. – The magnetic connectors

(a), (b) Fuselage connectors, (c). Push/pull rod connectors

C. Connect Modules into Airplanes

Hold the Base Module and the airplane module with each hand and connect the modules

in a hinging motion about the back end of the Base Module. As an example, Photos 2C1

and 2C2 show the connecting procedure using the Biplane module.

Step 1: Align the magnetic connectors of the push/pull rods in both the Base Module ( (i)

in Photo 2B2) and the airplane module and connect the push/pull rods;

Step 2: Align the fuselage magnetic connectors on both the Base Module and the

Airplane Module and connect the two modules into one airplane.