Electrolux ESF 67060 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Electrolux ESF 67060. Electrolux ESF 67060 20 halaman.

Halaman Cetak

• Do not fill the rinse aid dispenser with oth-

er products than the rinse aid, (dishwash-

er cleaning agent, liquid detergent). This

can cause damage to the appliance.

• Make sure that the spray arms can move

freely before you start a washing pro-

gramme.

• The appliance can release hot steam if

you open the door while a washing pro-

gramme operates. There is a risk of skin

burns.

• Do not remove the dishes from the appli-

ance until the washing programme is com-

pleted.

Care and cleaning

• Before you clean the appliance, deacti-

vate it and disconnect the mains plug

from the mains socket.

• Do not use flammable products or prod-

ucts that can cause corrosion.

• Do not use the appliance without the fil-

ters. Make sure that the installation of the

filters is correct. An incorrect installation

causes unsatisfactory washing results

and damage to the appliance.

• Do not use spray water or steam to clean

the appliance. Risk of electrical shock

and damage to the appliance.

Installation

• Make sure that the appliance is not dam-

aged. Do not install or connect a dam-

aged appliance, contact the supplier.

• Remove all packaging before you install

and use the appliance.

• Only a qualified person must do the elec-

trical connection, the plumbing and the in-

stallation of the appliance. This to prevent

the risks of structural damage or injury.

• Make sure that the mains plug is discon-

nected from the mains socket during in-

stallation.

• Do not drill into the sides of the appliance

to prevent damage to hydraulic compo-

nents and electrical components.

Frost precautions

• Do not install the appliance where the tem-

perature is less than 0 °C.

• The manufacturer is not responsible for

frost damage.

Water connection

• Use new hoses to connect the appliance

to the water supply. Do not use used ho-

ses.

• Do not connect the appliance to new

pipes or pipes not used for a long time.

Let the water flow for some minutes, then

connect the inlet hose.

• Make sure not to squash or cause dam-

age to the water hoses when you install

the appliance.

• Make sure that the water couplings are

tight to prevent a water leakage.

• The first time you use the appliance,

make sure that the hoses do not have wa-

ter leaks.

• The water inlet hose has a safety valve

and a double sheath with an inner mains

cable. There is pressure in the water inlet

hose only when the water flows. If there

is a leak in the water inlet hose, the safety

valve interrupts the flow of water.

– Be careful when you connect the water

inlet hose:

– Do not put the water inlet hose or

the safety valve in water.

– If the water inlet hose or the safety

valve are damaged, immediately dis-

connect the mains plug from the

mains socket.

– Contact the service centre to replace

the water inlet hose with safety valve.

Warning! Dangerous voltage.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical information

on the rating plate agrees with the power

supply.

• Always use a correctly installed shock-

proof socket.

• Do not use multiple plugs and extension

cables. There is a risk of fire.

electrolux 3