Electrolux ESF 68070 Panduan Pengguna - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Electrolux ESF 68070. Electrolux ESF 68070 20 halaman.
Juga untuk Electrolux ESF 68070: Panduan Pengguna (20 halaman)
Halaman Cetak
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of
the appliance door shows the electrical
connection data.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,
ENVIRONMENT CONCERNS
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
INSTALLATION
Installation under a counter
Put the appliance adjacent to a water tap
and a water drain.
Remove the appliance worktop to install it
under a sink unit or a kitchen worktop.
Make sure that the dimensions of the re-
cess agree with the dimensions in the pic-
ture.
Maximum
Cold water or hot water
Place settings
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.
How to remove the appliance worktop
1. Remove the rear screws (1).
2. Pull the worktop from the behind of the
3. Lift the worktop and move it from the
photovoltaic panels and aeolian), use a
hot water supply to decrease energy
consumption.
appliance (2).
front slots (3).
electrolux 17
8 bar (0,8 MPa)
maximum 60 °C
12
.